WTB open face cleaver

[Damo]

I'm looking for a 10" x 18 - 20P right hand open face cleaver. is there any around? or if there is somthing like this that I could work to these specs I would look at also.
Thanks
Damien

[yukoner]

What is the prop you are looking for ? I have an old merc thru hub 13 spline worn down to about 10 1/2 .

[Damo]

What is the prop you are looking for ? I have an old merc thru hub 13 spline worn down to about 10 1/2 .
Hi there!
What is the pitch of the prop and do you have photo you could send me?
Thanks
Damien

PS: How much $??

[yukoner]

I posted a thread for these props.

[Damo]

"Nice props"
They are the right dimentions but unfortunately I need solid hubs with no tube.
Thanks anyway
Regards
Damien

[yukoner]

here is another old beater I have that may be closer to what you are looking for. No markings but I think it was a 22, close to 11 inches left after hitting hard and getting pounded and ground back to 'usable' shape (emergency only). Enough prop left to be reworked I believe. Just too small for my uses.

[Damo]

Thanks!
what would you like for the prop? also would you you be able to find out what the freight be in genral post to Australia? and finaly do you take paypal?
Thanks
Damien

[yukoner]

Damien
Here is another solid hub I have. I think it has enuf metal to rework to a cleaver. It has a lot of blade to play with.
gilbert

[scfireman]

What kind of prop is the 11x20. I saw another one on here someone had. That thing looks crazy. How does it run?

[Ron Hill]

Those style props were from the merc BP era, if I'm mistaken, they (it) came off a 650 XS.

Here is an 11 X 20 I have, but don't want to cut it to a cleaver...

And another 11 X 20

the brass one is an 11 X 22 Cary... I got these from Pete DeLackner who ran them on a Sport D, with a 500 Merc. He won the APBA Nationals in 1971, and never raced again...So, these are true collector items...

[Roy Hodges]

Can someone tell me what an "open face "cleaver is ? I am guessing you mean SMALL HUB ? (no prop exhaust ) ? I have an O M C sport d/e cleaver , it is NOT prop exhaust , i wish it was .

[Fast Fred]

you can slide a can on thare to make it through hub:cool:

[Roy Hodges]

it ain't THAT simple. you need a Properly made and machined hub to slide on it . .........I used to see them , all the time when i went to the races , on sport e boats . but, i don't know where to buy one for my O M C cleaver (sport e ) , maybe Ron knows ?

[largecar91]

I see them on some of the SST 60 boats.

[Roy Hodges]

yeah, that's right , the sst 60 is mostly just a later version of the sport e 75 horse omc , i know it's 56 cubes , and all that , but mostly similar .

[dillon]

how many splines were in those 11 by 20s

[Ron Hill]

I think al these props we'ver been talking about are 13 splines.

[dillon]

ron ,how much would it cost me for u to build me one of those clevers

[Ron Hill]

Diameter and pitch, number of blades. number of splines....

[dillon]

three blades proly 10inches - 11 bye 20 -21-22 pitch and i think 14 splines do u have any clever close to this that could fit a 40 horse merc i could try out?

[dillon]

ron my fault i need a 13 spline prop also do u have any more of those 13 spline clevers layin around to fit a merc?