PDA

View Full Version : Bass towers

Roy Hodges
10-17-2006, 09:05 PM
Can someone tell me Bass phone number ? I am looking to buy a Bass tower housing for 3 holer johnrude
Jeff Akers
10-17-2006, 11:48 PM
Sid Bass..360-373-3839
nbranews
10-31-2006, 01:36 PM
David Woodel had a used one for sale a while back. Don't know if he still has it. His email is davidl6@cmaaccess.com
Give him a try.
alan akerstrom
12-07-2006, 10:30 AM
Here's a picture of the tower I made for my Bass gearcase 4 or 5 years ago. Started with an old fishing tower, cut off the bottom, and welded on the bottom shown here with merc 500 waterpump impeller and machined in cavity. Swivel is from a mark 75. The powerhead is a modified sst 60 56 cube. It's a monster. More of this stuff over on the weldingweb.com. I run this for fun on a 12'6" laydown Pugh, courtesy of Dave Weaver.
Roy Hodges
12-07-2006, 07:19 PM
I bought a new one from Sid , thanks everyone . - ROY
Fast Fred
12-08-2006, 05:46 AM
alan akerstrom

got any 3x2bbl sets 1" bore with removeable low speed jets?
thanks
FFX-61
alan akerstrom
12-08-2006, 07:32 PM
yes. And a mod 50 front. alanaker@comcast.net
Fast Fred
12-09-2006, 06:46 AM
i need some carbs, Swampanther is was lookin for a 19-s front1/2, i'm lookin for another 31m front 1/2. which you got ? i'll beam ya on the carbs
thanks
FFX-61:cool:
Roy Hodges
12-09-2006, 09:44 AM
Do any of them mod 50 front halfs use stock V-4 reeds and cages ? which ones . ?? i have a friend who wants to cast me a front , but i have nothing for him to copy . are all (55-through 75 horse) front halfs the same ? if all else fails , i guess a stocker could be cut and V-4 parts welded on? (i am a welder & have mig & tig outfits in my garage . But, no place for a boat ,SIGH)
Fast Fred
12-09-2006, 09:55 AM
the 19-s uses the v4 reedblocks, if your guna make one, use 5 over 5 blocks,
put starter mounts on it.:cool:
Roy Hodges
12-09-2006, 12:48 PM
the 19-s uses the v4 reedblocks, if your guna make one, use 5 over 5 blocks,
put starter mounts on it.:cool:i am not aware of much on v-4's. which ones use the "5 over5" blocks. I have a 135 johnnyrude , but never worked on it . its on my ski boat .another question: i think i saw one o yer pics showed 6 petal reeds, what that came off of ?
Fast Fred
12-10-2006, 08:15 AM
which ones use the "5 over5" blocks.
? , i don't know, 5 over 5 got to be V6 or V8, maybe not cuzz it's a strightin,
the 5 over 5 blocks are even on each side, no down sweep in the intake.

5 over 5 blocks are 31-m, 4 over 4 with the slope are 19-s:cool: