choppo
12-21-2006, 07:33 AM
1 set of Lab finish RH & LH SS 4 blade 28 pitch props. New $800 each
selling for $440 each plus shipping
I had them on a 38 scarab excel running in 90’s.
Sold boat
No dings like new in box.
Mercury Bravo One 4 Blade solid hub
MERCURY BRAVO I STAINLESS STEEL PROPELLER
High horsepower boats need high-output propellers and Bravo I 4-blade stainless steel propellers are Original Equipment on more go-fast boats than any other props!
• For high-horsepower, high drive height, outboard and Sterndrive applications
• Excellent speed and handling, Great for stepped hulls and cats
• Moving from a 3-blade to the Bravo I, drop down one inch in pitch (22" Bravo I for 23" 3-blade)
• Available with Flo-Torq II 1 1/4" hub kit for the Bravo XZ & XR Mercruiser Sterndrive
Lab finish details below from mercury marine where they were done.
Just as a high performance or racing engine is built to more exacting specifications than a production engine, Mercury Racing's legendary prop lab is available to modify production and racing propellers for optimum performance. Using the experience gained from years of testing at Lake X and race courses around the world , the prop lab will blueprint and balance a stock propeller to get the last few miles an hour out of your boat. RPM adjustments of up to 200 RPM are possible.
Speed increases of 2-3 miles per hour are common. In many cases, this is the biggest gain for the least money you can make. Cost is about $150 per blade.
I RH & 1 LH 25 pitch lab finish 3 blade $440 each plus shipping
1 Rh & 1 LH 21 pitch 3 blade $300 each plus shipping
Both sets in box’s & Both solid hubs
• Three-blade stainless steel design
• Large diameter and patented high-output blade geometry to move larger boats with less effort
• Improves acceleration and top speed on larger high-horsepower boats
• For outboards 150 hp and up, especially for offshore fishing, bay and sport boats
• For V-8 single, center-console Bravo One single, or dual and TRS sterndrives
Other pics availabe for 3 blade props if needed
http://img.photobucket.com/albums/v734/choppo/props/DSC_0010.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0009.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0004.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0003.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0002.jpg
selling for $440 each plus shipping
I had them on a 38 scarab excel running in 90’s.
Sold boat
No dings like new in box.
Mercury Bravo One 4 Blade solid hub
MERCURY BRAVO I STAINLESS STEEL PROPELLER
High horsepower boats need high-output propellers and Bravo I 4-blade stainless steel propellers are Original Equipment on more go-fast boats than any other props!
• For high-horsepower, high drive height, outboard and Sterndrive applications
• Excellent speed and handling, Great for stepped hulls and cats
• Moving from a 3-blade to the Bravo I, drop down one inch in pitch (22" Bravo I for 23" 3-blade)
• Available with Flo-Torq II 1 1/4" hub kit for the Bravo XZ & XR Mercruiser Sterndrive
Lab finish details below from mercury marine where they were done.
Just as a high performance or racing engine is built to more exacting specifications than a production engine, Mercury Racing's legendary prop lab is available to modify production and racing propellers for optimum performance. Using the experience gained from years of testing at Lake X and race courses around the world , the prop lab will blueprint and balance a stock propeller to get the last few miles an hour out of your boat. RPM adjustments of up to 200 RPM are possible.
Speed increases of 2-3 miles per hour are common. In many cases, this is the biggest gain for the least money you can make. Cost is about $150 per blade.
I RH & 1 LH 25 pitch lab finish 3 blade $440 each plus shipping
1 Rh & 1 LH 21 pitch 3 blade $300 each plus shipping
Both sets in box’s & Both solid hubs
• Three-blade stainless steel design
• Large diameter and patented high-output blade geometry to move larger boats with less effort
• Improves acceleration and top speed on larger high-horsepower boats
• For outboards 150 hp and up, especially for offshore fishing, bay and sport boats
• For V-8 single, center-console Bravo One single, or dual and TRS sterndrives
Other pics availabe for 3 blade props if needed
http://img.photobucket.com/albums/v734/choppo/props/DSC_0010.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0009.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0004.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0003.jpg
http://img.photobucket.com/albums/v734/choppo/props/DSC_0002.jpg