Chrysler racing gearcase

[largecar91]

Chrylser racing gearcase off 150 HP Chrysler racing engine. It is right hand with overdrive ratio. It is the more desirable splined propshaft gearcase. It is complete and turns very smooth. The driveshaft measures 19 3/4" from the top of the case to the top of the driveshaft. It is 5" from propshaft centerline to cavitation plate. It is in very nice shape(but needs paint). $1000.00

[Mark75H]

Its also the more desireable short version (long version is 7" between the prop shaft and cav plate)

Merc Super Speedmaster props fit it, plus oversize 10+" SSM type props (SSM's themselves only take up to about 9 1/2")

[largecar91]

Thanks Sam. It had a OJ 10 X 16 2 blade on it when I got it.

[largecar91]

Going on ebay tomorrow. If it doen't sell, it will go back on the shelf to collect dust for another 20 years.:D

[largecar91]

I LISTED IT ON EBAY. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=010&sspagename=STRK%3AMESE%3AIT&viewitem=&item=200062010131&rd=1&rd=1