PDA

View Full Version : NEW wisecos,Nissan/Hot-su 40-50hp


Fast Fred
04-21-2007, 08:29 AM
got 3 wiseco Nissan / Hot-su .030 overs for 40-50hp, New, As in NEW in the box
75 bucks +10 shippin in the US, rings, pins and clips.

and you can fit them in your yamaha 40-50hp:eek: :cool:

kevin
04-23-2007, 03:28 PM
Fast Fred,

do you do Tohatsu? If so I have a question:

I have a older 30 HP. There are five wires coming from the harness, blue, black, red, brown and green.

I want to have the following switches set up just like my tunnel. Choke, on/off, and start.

what wires go where? I'm particularly struggling with where the brown one from the C.D. unit goes.

thanks,

kevin

Fast Fred
04-24-2007, 04:30 AM
lookin at the book, brown is C.D. ground. brown comes out from the flywheel
to the C.D. box, two brown wires come out of the box, one with a ground loop,
the other runs with the black wire to the kill switch.

blue is choke,

green is the start, hit that with power, and that should pull the starter in.:cool:

kevin
04-24-2007, 10:48 AM
Thanks much!!! I'll try it out tonight.

kevin

Fast Fred
04-26-2007, 05:38 AM
hows it lookin?:cool: