a quickfoot prop?

[850cc racer]

Hey guys i have this prop amongst my things which i dont know what it fits
written on it is:

15Q, 10x15 or 10x35 the first numeral is not stamped well but beleve it is a 1
and then 13PZ or 13 DZ

it has 12 splines.

its for sale you name the price or trade and we'll work something out.
sst60 bits suit me for trades :cool:

http://img131.imageshack.us/img131/340/prop1es2.jpg (http://imageshack.us)
http://img131.imageshack.us/img131/prop1es2.jpg/1/w480.png (http://g.imageshack.us/img131/prop1es2.jpg/1/)

[Mark75H]

Yes, that is a Super Speedmaster prop, about the most common size.

I'm sure someone wants it.

[Ron Hill]

You have a midsection and a prop I want....

What kind of prop are you needing??

[850cc racer]

ah Mr Hill.. isnt it crazy half way round the other side of the world and we're swapping bits: Thanks BRF!!!

well what did u work out for the midsection? a low water pick-up nose cone?

well the prop i would be after would be for a SST60 boat. it'll run the 2.4 or 2.5-1 small diameter gearcase whichever is the standard one, the motor is a 920cc with all the goodies. it be quick:eek: i hope and its "the" prop i need to make it quick :cool: im thinking 23 be the pitch? the diamter i dont know.. the prop that came with it is 9/34x23 im thinking its too small in diameter?

whats you guys run over there on your sst60's?

850.


oh yeh this be the boat :cool:

[850cc racer]

oh yeh i also have the 1.85 and 2.0 ratios if thats better :eek:

[850cc racer]

so Mr Hill what have we worked out :eek:

[Ron Hill]

Tell me what prop or props you think you'll need...

[850cc racer]

okay! well i reckon i'd try and 12x23 and 11x23 cleavers..

have the nose cones come from the foundary yet?

850

[850cc racer]

so i want this stuff moved out of my sheds, so you better send me an address Mr Hill so i can get it to you!:cool::eek:

[sheuninck]

I was told the following
12.5 dia with nosecone
12.75 dia without

[850cc racer]

is that with the standard 2.5-1 gear ratio nitro case?

on mono or tunnel? how highs the motor in relation to bottom of boat? what about set back? motor size?
sooo many vriances... test test test is the way to work out size ;)
:eek:

[sheuninck]

my experience is with v-bottom (FE class Canada), ran prop-shaft 1" below pad.
http://www.youtube.com/results?search_type=&search_query=88voodoo&aq=f

I know the tunnel guys (SE Class) ran the 12.75x23 with entire gearcase bullet 1/2" above sponson bottom. Needed slightly smaller diameter with nosecone in sst60.