Are Johnson/Evinrude flywheels from 45 inch twins and 49 inch triples interchangeable? 1970s style CD ignition.
Printable View
Are Johnson/Evinrude flywheels from 45 inch twins and 49 inch triples interchangeable? 1970s style CD ignition.
I am pretty sure that you can not do that..
I had also thought that but a spare I have made me wonder. I know the stators and timing bases are different but the trigger magnet ring on the flywheel hub is split at 180* like a triple. Casual inspection looks like the physical dimensions are the same. Unless there are different arrangement of the charging magnets. Or could be the one I have that I think is from a twin is actually from a triple.
I couldn't find a spare example I was 100% sure was from a triple to compare. May have to pull one off the 75 to compare.
You need to check the dimensions.. dia, position of the keyway in relation to the magnets exactly. & the depth of the cavity compared to how deep the wheel sits on the taper. Youll need em side by side. I would have thought no way till you stated the magnets in both are 180 deg. If they are... You can go to BRP parts catalogue & reference #s but even if different it could be for a reason besides fit. Good luck.Quote:
Originally Posted by Barry Strawn
Sorry boys,
The 45 and 49.9 crank tapers are two different sizes, but the Merc 500 flexplate flywheel fits the OMC triple with a spacer washer and thin nut.
Tim