I'm still confused. Greater in relation to what?:confused:
Printable View
I'm still confused. Greater in relation to what?:confused:
stock,stock plates, the mod50 plates have more volume right in front of the port window, just like that Runne set:cool: , you follow?:cool:
That much is obvious. I kinda think Jim N was hinting at something else?
thare is not a lot goin on in thare, straight shot down, slight bend with a large,
Extra Large Exit in to the adapter, I don't have a Mod50 adapter, yet, think i found one, haven't seen the tuner yet:confused: , hopein it's welded to the adapter:eek: :cool: got to be the exit size,
I can't run "pipes", had to go with SST70 exhaust rules, Thinkin i still need one of them 3 in to 1 dry slippy cans with tiller lever controle, like a bike clutch lever, thinkin thats workin:cool: :eek:
I couldn't agree more. For instance: In my old Merc 500 mod, I ran the longer reedstops from the big bore inline six's. I set the reed stop height at the low end of the factory tolerance for the Merc 500.Quote:
Originally Posted by Mark75H
(My 44mod was pretty darn fast- so I'd been told.:D )
My theory was that more control of the reed would help the reed open, and more importantly CLOSE, when it was supposed to. Another benefit was longer service life from the fibre reeds.
and back over hear, Jeff, Jeff AKERS,
OK was guna make some Nydal Exhaust plates, but cuz of some words sayed hear , i ran down them guys in Washington, and baged a set of new fr-19s exhaust plates, I asked them if thay would be selling them, thay sayed NO.
so i am tryin to get the mold from Bomb. at 275.- 325. a set i see it as the best set up for the bucks, even if you compimise them some to fit a stock case:cool:
so that ware thats at:cool:
tryin to bag the fr-19s addapter plate as well, so to make a compleat setup.:) ;)
So you aren't going to be needing to borrow the Nydahl exhaust that I have? What are you planning on building now?Quote:
Originally Posted by Fast Fred
Ummm, Errr...........Fred,
Like David I'm not so clear on what you posted:confused:
Are you saying you have found some Mod50 molds and are going to reproduce those insted of the ones David has? ? ?
ya, kinda, i got a set of them mod50 plates but i've never seen them, thay got sent to Wienandt,s shop. so i baged a set from Greg Jacobsen in Washington.Quote:
Are you saying you have found some Mod50 molds and are going to reproduce those insted of the ones David has? ? ?
he said thay are only makin m-31 stuff, so guna take some mesurements lookin for what Mr.NERSTROM was talkin about to make sure i don't miss it, guna try to get the molds form Bomb, see what thay want for molds thay don't want to use:eek:
jeff, could make a 3 in to one W/ a 250cc dirtbike slippy can on it for ya:eek: :cool:
kinda like this:eek: http://img425.imageshack.us/img425/5...tler6ps.th.jpg:eek: but w/ a slippy can on it:cool: