-
Bypass cover
Could someone explain what the bypass cover on an omc outboard does? all I can figure is that it is a vacuum chamber for the fuel pump? I noticed the 25hp and the 30hp 31.8 (in 1995) were different but what makes them different? Thanks,
Buddy
Sent from my C811 4G using Tapatalk
-
Anybody?
Sent from my C811 4G using Tapatalk
-
Its the cover over the transfer port therefore gets pressure and vacuum in it hence operates the fuel pump
-
Should there be a big enough difference to be worth swapping the 25hp cover for the 30hp cover?
Sent from my C811 4G using Tapatalk
-
I would guess its the same part
-
The part numbers are different between the 1995 20-25hp and the 1995 30-35hp. Id rather not order one and pull mine off just to find its identical. Or has a dimension that can be easily modified.
Sent from my C811 4G using Tapatalk
-
The cover is not where the hp difference is
At a guess the porting in the block is different so the cover is made to fit that?
25 to 35 is also the venturi size in the carb
-
After further investigation, it appears the difference is a small hose fitting above the fuel pump. I feel more relieved now. Thanks for the explanations!
Sent from my C811 4G using Tapatalk