CDI 2 IGNITION With TIMING CURVE

Who makes a CDI 2 IGNITION WITH TIMING CURVE?
HAVE THE MSD:...,,,

Anthony - Go to the source. Most of all CDI ignitions used on two strokes today are made in China and Japan. If you now what spec's you need e-mail them and see what they have that may work for you. Here is an example of one link ----- http://cnwzxl.en.alibaba.com/product.../CDI_UNIT.html

Good Luck - Tom

Thanks Tom,
I fond another link from india who made the first digital CDI.
I am thinking that there has to be a two or three cylinder Bike, PWC or SLed that uses a CDI with timing curve that can operate with a trigger input and charge coil input. It gets complicated when you factor in the 5pole alternator and other electronic features.
ROSSI makes a nice PROGRAMABLE ignition, so they are out there

Guess ill have to research some diffrent apps was hoping to use stock trigger, charge coil and flywheel.

Anthony

I have several CD ignitions with mounting plates that fit Konig and Yamato engines. If you have the right type engine, these could be adapted to work. Need to know how many cylinders, alternate firing or do multiple cylinders fire together. These are flywheel excited CDI units that are timed statically and do have some retard capability at high RPM. Flywheel excited means no battery required in this case. If you are further interested send me a PM thru the website by clicking on my name, and then using the PM capability of the site.

PVL in Germany makes them both in analogue and digital the analogue is like the old motplat ingnitions in fact the pvl coils can used on them.
http://www.pvl-zuendungen.de/en/fb_i...stingsmfg.com/