hey guys i am after the measurement from the tip of the nose cone to the base of the water pump on a super speed master and a mk6 quickfoot
cheers
thunderstruck
Printable View
hey guys i am after the measurement from the tip of the nose cone to the base of the water pump on a super speed master and a mk6 quickfoot
cheers
thunderstruck
not sure if this will give you what your after? page 2...
http://www.opcrace.com/PDF/120.pdf
that's what I was after ;)Quote:
Originally Posted by 850cc racer
is the distance different the same for the old ssm?
cheers
thunderstruck
I measured a regular inline 6 SSM, it measured 9.30" from the bolt up flange to the centerline of the bullet ...
I was a little confused by the 120 spec sheet until I realized the "W" spec is to the top of the VI ... the cavitation plate is not on the VI, its on the tower.
Looks like a VI is 2" shorter
Are there specs for the Selva F-1000 similar to these available?
Mark N