hey there always a few way to skin a cat. if you can catch it first
Type: Posts; User: Detroit Whitey; Keyword(s):
hey there always a few way to skin a cat. if you can catch it first
you can see it in this pic really works well and its all factory parts 61731
61730 like this one all you need is a lower mount bracket and a short tiller shaft from a 3cly
Seems odd that no one uses the set up off Johnson short shaft 40,50hp motors there are plenty of them around and you can still order the parts new here in the good ol USA.
Ok so some guy can make a AR-15 lower assembly and some other guy can print a human ear. Why are we as boaters not printing the parts that dreams are made of? I just got a look at the maker bot home...
If you gonna run the fishing lower unit i would look for a stainless prop from omc like a srx or maybe one of ther bass boat props like a raker or shooter. I ran mine with a 27 omc cleaver and didn't...
Had that boat might even be that one who knows but what I do know is you have to go way up get a jackplate and block off the two top holes on your water pick up on Gearcase or you'll over heat....
Yep it's a good mod for those of us with skinny pockets. The gain is more prevalent on the top end with a very light rig find the stocker it will have true majority of the meat cut already that helps...
I have had a long list of things cause this style of boat to porpoise.Will need more info at what speed?how many people in the boat?what did you change that made it start to porpoise? so if i say...
Its called yaham bond 4 this is the part number ACC-BOND4-MA-00
yes it was a yhama bond but what one not sure the color was gray when i get to the shop i`ll look
i used to pin them but if it`s not done right you can pull the carrier out of center and cause internal damage over time cracking of the carrier and leaking are all part of that deal.Use a good hi...
Did omc have a spec sheet on kr`s& Kc`s? I have a Kc13r and would like to know more about it i want to trace it back to the factory if thats possible.The info tag says it has a oprerating range 5400...
most of the time it wont work due to the block casting being differnt but if the 49 block is newer like when omc had 49 and 56 it think like 1988 comes to mind it will work. The older 49 blocks you...
The mertens make good stuff :d
might also look to the gear case if everything is working. Guys always over look the gear case.Check for metal in the lube or chunks good luck!!!!!
thanks for that link after reading all the post sound`s like there is no hard yes or no.Years ago i had a knee board that had dimples the size of golf balls formed into the bottom and it was faster...
i have a question I`am sure somebody on here has tried contouring a running surface what are the pro`s and con`s can a ruffed up lets say v bottom pad be faster than a ultra smooth pad?
Went thru the same issue its jetted to lean. I ended up riching up idle mid and high the 3jet carbs have often done the samething to me on the56in blocks. Those motors never came with 3jet carbs at...
theres an adaptor harness that goes from big red to deutchmire call a brp dealer and it will be in the common parts book
just call your local brp dealer and ask them for the part numbers super easy then ask them if they have new or used
Just use the clamp ears and pivot tube off of a1990or newer 2cly jhonson use your pivot arm and bottom mount clamp off the stinger then you can use the thru tube steering and the new eTech trim will...
i have been running a BRP fuel pump for years no issues still going
sounds like its time for a different pump maybe!!!
Ok i have heard tihs going around for a while has anybody took a stock gear case put it in reverse and used a left handed prop and if so are what the failure issues?
You are really have to start with the people that build these style of craft there is the Thunder cat racing site out of aus,there are a bunch of web sites on the other side of the pond.We here in...
i didnt think it was that tuff a question but never mind carry on Here
Fred i was meaning how many are over here in the states that you know of Mako Xtreams that is.
nice block there Tim
Yep that set up sound like something i`ve seen they work ok for a while then they start stayin open just a touch.What kind of slt is that going on and ya never side how many big red x boats are...
Fred are you running the stock reed set up on that sst60 or is that a mod56.i have been toying around with differnt reeds for the stock cages like differnt reed meterial like carbon...
Well this is intresting i think this thread is off in a differnt path
does anybody top pin omc pistons?and looking for sealed wrist pins also
Fred i hope you did some bottom work on that mako to try and run even mid 70`s the one i had would try and fly like a plane and that was just the start of the swimin trip looks good though!!
cool cans are leagle in x class
if ya take it out it will never last hek might not make it down the corse
What are you trying do or achive by adding a light flywheel.Bet if ya put one on and did a blind test ya coulnd`nt even tell the differince.depends on the rig?
find your self a 65hp pancake flywheel
Fred on the tuner i faced both sides shot the hole for the mounts and the power head.As for lenght you know your gonna have to play with that one i made mine so i could change between a couple of...
I`ve got it on my battery box i use a battery on off switch mostly because i dont have a wiring harnes just start choke and kill :D
if your key isnt shuting the actual power off you`ll be replacing the rectifer again down the road.that theres the reason i gots me a power off switch on my 3 holer
start with stock sst60 jet set up if your running a 49ci if you gonna run a 56ci block you`ll have to go biger to break it in then do some plug reads and start from there but be carefull dont get...
the shifter dog is differnt from the nitro to the sst60.The 60 has larger lugs on the fwd side.Dont know why they didnt use that in the fishin gearcases
Can anybody still get pistons from Phill? The Last i heard was he was out.
You need to talk to Tim Kurcz
Also find a block without the idle bypass hole in front of the exhaust
I went to the 2 pump set up a few years back but had issues with fuel eating the diaphrams.i ended up going electric and after that no more melted pistons wich is nice.
LEAN!!!!!!!!!!!#1 is this motor a 50or60 hp block ? the idle releaf`s kinda give it away. Do you race this in some kinda class or play motor?
You are just gonna have to come to topO this year and find out.I`ll see if i can get some pic`s on here. Kept bustin the ss pins at the top on the old ones and i might have like 5 hole old style...
Just cant be so Fred with all your know how why are ya still running that old 2ear clamp braket.you`ll find out that they are not made for what our boats can do.Almost bought it at the gold cup this...