If I install the throttle per stock set up, there is so much force on the dead man throttle to retract the wire in the cable, that the wire bent on my throttle. I was just asking if you disable the...
Type: Posts; User: marchettih2o; Keyword(s):
If I install the throttle per stock set up, there is so much force on the dead man throttle to retract the wire in the cable, that the wire bent on my throttle. I was just asking if you disable the...
Thanks...Do you have a photo of how you are setting your throttle up at the engine...I have some ideas, but don't want to reinvent the wheel...thanks in advance...george
Would I have issues if I locked the spark advance on a 3 holer...I am have issues with my dead man throttle pulling the complete throttle/spark assembly...too much force required in stock...
As thorn asked above...."what are the performance gains?"???? Have there been any test performed on a selected boat, running stock, then your system....any noted results/???
Any HP dyno test...
That would be nice...thanks...PM me please..gg
Sounds Great! Please email me what you have in the 12 - 12 1/2 X 24" catagory...three blade solid hub cleaver. Photos would be nice as well
You can get me Sam, at ggusta@tx.rr.com..thanks, george...
The 76 stinger I have has of course, the nitro. The prop is correct as the builder is reknown. I feel I need more diameter. But those props are few and far between, just look at all the postings on...
Question:
I have a light tunnel with a slightly modified 50 cu in stinger. I am running a 11 3/4" X 23" cleaver 3 blade. I am only getting 72 mph gps at 7200 rpm's..this calculates out to roughly...
Agree with Jeff...also, What performance gains have you calculated or better yet, actuals?
Thanks, George
Not sure when the first one arrived, but I have a 2.4 Bridge that is around 1979
Hey Barry,
That is exactly what I needed to see. Thank you. It looks like you are using a Chrysler pump like I plan to....George
Does anyone have a few photos of how a single trim ram is attached to the OMC downhousing? I have a Mercury ram attached at the forward end to a SeaWay casting thru the transom. I was just curious...
ProMarine in florida makes a good piston...g
More info on the 74-75 Stingers/Hustlers...gus in texas