good day
performed the first test after a long downtime.
I made some changes to the boat:
I added a spacer 2 "up with 12" total spacing.
I installed a lower unit worked by BOB'S...
Type: Posts; User: alexdante; Keyword(s):
good day
performed the first test after a long downtime.
I made some changes to the boat:
I added a spacer 2 "up with 12" total spacing.
I installed a lower unit worked by BOB'S...
post the new test only at the beginning of movembro.
I'll be traveling.
I thank all
best regards
I had thought of using the ratio 2.07, because I will install a kit big foot bobs nose cone machine.
That way I can lift more and the engine will have more consequentimente RPM.
But my only...
Previous tests:
black max 12x1/2x23p 50.5 miles 5600rpm - 8" jack plate
Laser 21p 50 miles 6000rpm - 8" jack plate
Turbo 13.25x23p 50.3 miles - 5200rpm - 8" jack plate
Ballistic...
Approximately 1000lb full.
It is the prop of the ground
Other photos:
http://i89.photobucket.com/albums/k220/alexprime/P8280449.jpg
http://i89.photobucket.com/albums/k220/alexprime/P8280447.jpg
it an EAGLE by RON...
http://i89.photobucket.com/albums/k220/alexprime/11-2posiolateral-1.jpg
I put the platform of anti-cavity parallel to the pad.
then took the measure.
Hope that made sure
"Also the...
1" 1/2 below pad.
http://i89.photobucket.com/albums/k220/alexprime/11-2abaixopad.jpg
Position the TRIM
http://i89.photobucket.com/albums/k220/alexprime/PosiodoTRIM.jpg
best regards
I measure the height from the pad.
Later put the measure.
best regards
Staff would like to help one of you with my boat.
The boat is 15ft bassboat and supports engines up to 115hp.
Today I am using the prop 13x7/8x26p signature by RON HILL
The motor is 90hp...