I'm looking for the best way to transition the drive shaft from a smaller diameter lower to a larger diameter drive shaft and allow access for changing the pump. I've heard of using impact sockets...
Type: Posts; User: Koondog; Keyword(s):
I'm looking for the best way to transition the drive shaft from a smaller diameter lower to a larger diameter drive shaft and allow access for changing the pump. I've heard of using impact sockets...
You had a really nice motor Bobby. To bad some thief is enjoying it now. You've got the talent to build another great one for sure.
Thanks, I will try going a little richer or increase the idle jet size
I have a Yamaha 40hp (Mid-80's Yamaha 40ESG, 3 cyl, two-stroke) that has a hiccup at idle or when thottling it down to idle. I have messed with the mixture screws and I've tried adjusted the idle...
Using longer cables keeps operation of the shifter and throttle smooth
Sent from my iPad using Tapatalk
Remove the pump and worm gear. Fabricate a cover plate and gasket. I use 3/16" aluminum plate. Secure the plate with two m6 x 1.0 x 20mm bolts. Seal the oil injection ports on the intake. I punch...
Thanks Mike
Pre-mix
Can you mix and match the older cranks with the newer crankcases? Or is it the other way around? Basically, I'm wondering if I can put a 1984 crank in a 1999 crankcase. Which crankcase is better...