Abnormal noise; get your torx bits out & disassemble it!
Send it to me I'll fix it! The "A" G/C is easy!
Type: Posts; User: 17W; Keyword(s):
Abnormal noise; get your torx bits out & disassemble it!
Send it to me I'll fix it! The "A" G/C is easy!
L/H connector only has 3 wires & R/H has 6 wires.
Riverside Marine's #- 501-372-0985
Sounds like both carbs you are playing around with need a to be rebuilt & a fresh kit BRP #396701 installed.
Partial choke creates a rich condition (allows fuel to flow from all orifices due to...
Can You communicate with the ECU?
If you can, what RPM is it spinning over at while cranking? It MUST spin at minimum 200rpm. ****If you see RPM the CPS is good!****
Your system voltage key on...
This engine uses 2 fuel pumps, one was for bring fuel from the fuel supply, the other to deliver fuel to carbs via the oil mixing unit.
Maybe J. Nerstrom will chime in on this.
If you were to pull the front off the air silencer & observe the throttle plate position @ WOT they should not be fully open on a 25hp. The 30hp opens the plates completely. You just need the center...
973-948-8885
I spoke to Jerry Pretzman about digging some pics out from when the 2 of you work together......
Same Results....
Might have something to do w/the change in Series Owners.....
If the 80 has a similar plate.....replace it! As Dave stated above, I have seen this many times.
Use the 3cyl 35hp.....if you can obtain a powerpack w/out a rev limiter.
There is a difference in port timing from the 25 to the 30. They also do not run the same intake manifold. You can get the larger carb but performance increase will not meet your expectations.
...
Dave- You should have Mitch post some I know he has to have many...
Another shot of myself & my ASR.
Russ- Would be real curious to what you guys have packed away....by the way do you remember sleeping on your trailer in Cardinal...the things we did when we were young.
#1- I belief this is crazy John McManus (69-CE)
#3- Waddington, N.Y. pits?
I was 12, I got too heavy to race J any longer. I have to locate some more pics. I think Dad has more somewhere.
I to would get into 20SSR in a heartbeat....No sidefins! I would love to find my...
Me & my ASR rig...years ago I had torn my wicked step-mothers face out of the pic.
Dad & another fella launching me in ASR. I believe the 26-B in the background was the fast Jay Gignac.
Russ how many Yomatos did your Dad sell as a dealer? By chance did you guys put any of them on storage during the lack of racing in the Northeast in the late 80s?
Couple of pics of my JSR Austin rig.
1-Adjusting carb- Me, Dad, Pete Forcier & sons Scott & Jason.
2-Dad & I getting ready for heat 1 JSR.
Dad's rig next to Russ's trailer. I was not there but Bobby & Gerald tell a story about trying to find Dad just before the green flag for 20SSR.....Maybe Bobby can elaborate.
The Days w/out carts....This may not be Sydenham....
1-Dad w/his recently aquired 25SS (The Step-mother or what ever she was, was supposed to race it but my ASR rig was too fast for her)
2-Dad's 20SSR rig
Mitch Meyer
Doug Reed
Ron Waterson
As a kid I watched these guys battling in week after week.