Search:

He has come back before.... and I'm sure he will again.

I think I win that one.

Phil what don't you understand about outboard applications. Do you want to let off the throttle at full speed and have the boat to continue providing thrust for another 150 yards into the river bank...

You struck any oil down there yet phil?

Phil...

Lets go back to the drawing board with a little simple physics lesson.

Take a 3 foot diameter solid disc and a 3 foot diameter ring. Both have the same weight of each other. You put...

Wow Phil, a 2 year old is more mature than that.

Haha.... Convince Phil if you get a high pass filter for your boat, you will pick up some on the top end.

You are talking about the momentum that the flywheel carries when you let off. I was thinking what you meant was you could get a random extra bit of energy when running like using NO2. Your...

PDT...

knows everything about flywheels, outboard oil, steel jack plates, but he doesn't know what kind of water pressure gauge he needs to get for his 60hp Johnson

I'm not getting what you mean about the cavitation and the flywheel having stored energy and how a lightened flywheel doesn't have enough in it. ENOUGH OF WHAT IN IT??

You were on here a month ago and didn't understand the torque vs. horsepower. You didn't understand how the torque curve falls while horsepower keeps pulling on up. But now you are an expert on...

And PDT, I'd like to hear your explanation about "stored energy" of a flywheel.

For once you agree with someone on here. Removing a pound here and there adds up. But why would you want to put a heavy flywheel on the motor and weigh it back down? You may be an engineer, but I can...

"I don't think I am smarter than anyone, but when a complete fool try's shooting me down with rubbish I will obviously stand my ground"

I'm kinda seeing a trend here Phil... You are the fool...

Looks like the 90 got outrun this time.


http://www.youtube.com/watch?v=FTd8bJZDWpU&list=UUjQkUitmspKT-57v59QN38A&feature=c4-overview

Ok, I'm done with the videos now. Sorry about your thread...

That is because you know EVERYTHING, don't you?

And just because the 90 has more factory rated HP than the 40 doesn't mean it is guarenteed to win the race. Does a Mack truck with 2000ftlbs of...

Since I've sourced a few videos I found on youtube here is Mike... I think... It looks like he is running with 88workcar's green 14 allison with a 90 Yamaha.

...

Hey Phil, how ya like this one?


http://www.youtube.com/watch?v=0JGyku_oYiY

This one to me sounds just fine idling along.

http://www.youtube.com/watch?v=PmnLjbWHlP0

This is not my video

I don't know what y'all are talking about. PDT knows how to make his boat fast and would probably smoke anyone that tries to race him. His 13foot boat with a 60hp can go a whopping 38mph. Heres his...

And Phill you wouldn't last a minute down here saying that in the southeast. Why you gotta be that way?

That's what I was saying with the 2 banger OMC's. The older 80s models were so inconsistent, they would fire then skip a few revolutions then fire again at idle. I think older electronics played a...

then a lightened flywheel will be a very bad idea as none of the stored energy in the flywheel
will be available to be used ..

Phill, I don't understand what you mean as in the stored energy in...

Nothing personal here, but I would listen a little more to someone else that actually runs these modded motors, or Hydrotec rather than someone that runs a stock 60hp OMC at 5500 rpms on a 1200lb...

Yeah just keep jacking up till your w/press gauge tells you otherwise. I've plugged the upper half of my intake and still get 20psi at WOT. I have the propshaft running about 1.75" below the transom...

spend what's left over from hydrotec on a livorsi 8k mini tach.
http://www.livorsi.com/images/catalog/dc/dc8000.gif

ok apparently they don't make one for a 3cyl

Lets see some video!

post a first startup when you get it back together. Looking forward to see how it runs

Are you saying its too small to see it?? lol

Well I call dibs on your fresh Hydrotec powerhead!!

Prob will open them up eventually, but was in a hurry to put the case in the water and see how the bob's lwp worked.

Preciate it.

Finally figured it out

Did my picture work. I don't know why but I seem to be incompetent at uploading pics...

You got that right!

We have drilled one out when we put a bob's lwp on. I think it was a 3/4 in hole with a hole saw. We didn't have any speed gains, just had to re-jet cause it went a little lean. I made a plug with...