Just picked up one of the 12.5ft Rinkers. I was wondering what kind of speeds you can get out of this hull and what motor? I am considering making it into a pickle fork and cutting the front back....
Type: Posts; User: DRAGRACR; Keyword(s):
Just picked up one of the 12.5ft Rinkers. I was wondering what kind of speeds you can get out of this hull and what motor? I am considering making it into a pickle fork and cutting the front back....
Zoom in on #3 on the head gasket you posted a pic of.... The gasket is leaking whether you had the block and head skimmed or not... (dark spot on the gasket ring at edge of cylinder) You need to...
Looks like #3 is leaking to me. Look at the gasket ring it has soot on it. Prob pulling water in. Block may not be true.
http://www.ebay.com/itm/NEW-YAMAHA-ANALOG-TACH-W-WARNING-LIGHTS-FOR-YAMAHA-MOTORS-94-UP-6Y7835408000-/301701356732?hash=item463ecd5cbc&vxp=mtr
New analog for $114
Used analog for $39...
Do yourself a favor and spend the money on a Yamaha tach and problem solved...... I went thru the same crap on 2 3cyl motors before listening to someones advice. For what you are about to spend on a...
Got my Bobs Machine lwp heliarced on today, now the hard part placing the hole in the lower unit housing. There is just not much room to work with between the input shaft housing and shifter...
Ok will check that also. Put a brand new pump on a month ago but will have a look.
I have lowered the float level but haven't been able to try it yet.
That is odd it seems to go fat unless my jetting is rich which I don't believe it is. Running stock jetting 140/145/140. ...
The one I bought was Pt # 6Y5-8350T-83-00. There are others that will work but this is the one I have.
What rpm are you seeing at idle? More than likely your setting is not correct on the tiny tach. I have tried 2 different brands of them, now they are sitting in my tool box. If you have a 2 cylinder...
Can anyone tell me where they are setting the float levels on round bowl 70 hp carbs? I think my float levels are too high, and when I hit any chop my motor falls off like it is flooding out... I can...