Nice!
Few more updates
My engine builder is very busy at the moment but hoping to get on it soon
All the right bearings and gaskets have now arrived this was a mission
The ccm reeds have arrived along with the bobs nose cone from the states
New starter fuel pump and coils have arrived
Powerhead is back in the chemical tank for the final time it’s been in cleaned and in many times to strip back completely
Flywheel is having a little bit of a tweek removing the pull start, then the crank road pistons and rods are off to be balanced before being loosely assembled so it can go for cnc porting and head work.
While that’s happening hoping to have the one come fitted and a glare gearcase mods some tweeks to the leg, solid mounts assembled, fresh paint ready for the powerhead
send me your number, 985-519-0367
Helping folks out around the globe.
hydrospeed77 liked this post
Things went very slow I’ve picked up the parts and am continuing myself.....
Few more updates, carbs are clean and together
There are currently 8 users browsing this thread. (0 members and 8 guests)
Bookmarks