I was ready to switch to Pennzoil 100% synthetic until reading that they changed the formula. Is this true or is it still a really good oil?
I was ready to switch to Pennzoil 100% synthetic until reading that they changed the formula. Is this true or is it still a really good oil?
50-50 Blend Amsoil Dominator & Mercury Rejuvenate. For Vintage Merc race engines 16:1 minimum. More is better. I did not know the later was discontinued. Bought some at a dealer last fall. This stuff caught my eye because it resembled the trick 100% synthetic stuff Mercury sold in big jugs back in the late 1980's.
Why the 50/50 blend?? Just curious, not familiar with Dominator, what's its claim to fame???
Nothing scientific, maybe I will go 75-25 since the Amsoil seems easier to find! **See the link below**
http://www.amsoil.com/shop/by-produc...?code=TDRQT-EA
These guys know 2-stroke engines. The Amsoil HP Synthetic also works well on oil-injected V-6 Mercs. Can't speak for any other marine applications. The key on the old racers is more oil is better!
Which oil would you prefer:
Tornado, which is a 2-stroke oil that is 100% synthetic for high speed, heavy-duty air-cooled 2-stroke engines.
Or
Atlantic, a 2-stroke oil based on premium base oils, a TC-W3 oil suitable for all 2-stroke outboard motors.
Or maybe a mix of both to obtain a semi synthetic oil
with better features for 'fast' water-cooled outboard engines?
• If you're still in control, you're not going fast enoughfilthy phill liked this post
Every time I think I have found the magic 2 stroke , I hear things about it to make me cringe and put that idea to bed.
even the cheapest 2 stroke oil out there if run at 25 to 1 is not going to harm any motor..
Full Speed thanked for this post
Mark75H liked this post
XP ?
is that similar to XD ? or is this something else
thanks joe. I had never heard of it before.
I have been toying with the idea of going to a fully synthetic oil for my outboards, and with fully synth being a bit thinner would run that at 40 to 1 rather than 50 to 1 ( I am thinking the crank needs more than the top end )
Not many fully synthetics around that have the tcw3 specs though.
But I have found a fully synthetic oil in the uk at a realy good price compared to marine branded names that I am seriously thinking about using..
what it realy boils down to is what exactly are we supposed to be looking for in a good oil ?
do we use the JASO FD, API TC ISO EGD specifications or the TC-W3 specifications, surely any oil that meets these TC-W3 standard should be good for any outboard motor. ?
the Label on the container that I have found says "5 Litres of Fully Synthetic Marine 2 Stroke Oil TC-W3" and lower down says " Product Specifications:API: TD NMMA: TC-W3" and its GREEN in colour.
here is another part of what is on the can..
A high performance Synthetic 2 Stroke Oil formulated for use in water cooled outboard engines using premix or injection systems.
Designed using powerful detergents to help give a clean burn and reduce engine deposits.
Suitable for use in Tohatsu, Mercury, Suzuki, Evinrude, Johnson, Mariner, Seagull, Selva, Yamaha Engines.
Question is , does this sound like a good enough oil for my evinrude 56 running at normal cruising speeds and the occasional wot throttle runs. ?
is the fully synthetic a better option than old fashioned mineral based oil for my motor ?
according to the specs its a good oil ?
There are currently 7 users browsing this thread. (0 members and 7 guests)
Bookmarks