pictures of an A looper powerhead that was given to me. Don't know year or who raced it or when. On top of the block it has PROA 2.160 and 9FA stamped in it.
pictures of an A looper powerhead that was given to me. Don't know year or who raced it or when. On top of the block it has PROA 2.160 and 9FA stamped in it.
2.160 is the bore size, don't know what the 9FA # means.
The flywheel is something different. I don't remember anything like that coming from 5th & State.
It doesn't even look like there is a notch in the cranking plate for a rope, or if there is it is very hard to pick out. The cranking plate looks like half of a v-belt sheave, that maybe bolted together with the other half and a hub. I know some of the four and six cylinder motors had the CD Merc ignition from Quincy as I had one put on a C Flathead at 5th and State, but were there many A's or B's that were done by Quincy with the CD? We had an A with point and condenser ignition that really came to life with automotive coils from "K-Mart". They were supposedly the hottest thing in coils in that time frame (mid 70's) and worked well on that plus some other motors I had.
Bill,
Yes, we built a lot of 2 bangers with CD ignition or as Chris and Clem Landis pronounced it, ig-ny-shun.
The early ones had the 2 extra slots filled with solder. Later ones were available with just 2 slots.
Did you also happen to notice the high speed adjusting needle on the carb. Looks like stock Carter both in appearance and location.
Have to sign off, I hear Norma stirring in the bedroom. Need to go see what Santa left us under the tree.
MERRY CHRISTMAS TO ALL!!
There was a rope plate on the flywheel. It was removed and used on a D-mod engine before it was givin to me. Thats all i know about the engine, it turns over very nice and I would think with a carb cleaning and rebuilt fuel pump it would run. The Carter carb is stamped FA on both flanges. I would asume this powerhead is a complete, original and not been basterdized, the only parts missing is the rope plate, outer throttle cable holder and spray sheild.
I didn't get the cd box or coil for ignition.
53w
The flywheel and the pic of carb stamps may not show up.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks