my form-e ride

[formeone]

hopefully pics came out .. just thought someone would like to see the ride ready to go testing on sunday with the new front case on,,, hopefully it will work shooting for about 102 mph like the stock case did years ago when set record..,,,we shall see,,

[formeone]

the boat george luces old hydro ,,, a pugh...99 model

[BRIAN HENDRICK]

Cheney; -looks like you sprung for a new exhaust pipe.
Times must be good. That last one from the '56 Ford was looking a little ragged.
And 'real' paint on the boat.
Did you not say grey primer was lighter and faster ?
Good to hear you getting back out.
GOOD LUCK

[formeone]

after i sold old motor had to spring for new,, made another exh real close to the old one some better flow and couple tricks to the plate to help exhaust,,,, my first pugh luv the boat,,, no times bad for me unemployment.... this motor should have way more power than old one not sure about the snowmobile style fron case yet that i built,, but deff know the motor way more hp...

[BRIAN HENDRICK]

Was this your last ride, '04?
Looks like the pipe had wore off,
but the primer was holding on

[formeone]

nope,,, deff not mine boat i set record with was purple,,, calleit purple screamer it in region 10 still i believe.... i never had a primer boat,,

[BRIAN HENDRICK]

-here is the record boat.
-what 'color' was the boat u had in NY at the Nats
-or, are u just trying to get me to post more pix?
I have some u may not want posted

[bill boyes]

Nice picture of the Oroville Calif Kilos. I was on the nbr 1 scanner.

[formeone]

oooo yaaaa you right brian,,, forgot about that boat,,,, and how lousy i ran there newyork after my buddy stuck me with the wrong jets in the motor,,, that was the 40 inch wide boat i built,,, best turning form-e boat i ever had,,, sold that with all my orig stuff,,,, use to see about 92mph all the time in it i raced it at ocoee fl also,,, when hunter blew his new kevlar boat over when he first got it,,,, that boat was karelson on bottom to different lift points up front, 1/2inch twist,,,, since i use to help ed build boats for years he sorta my 'soto' daddy,,heheheh..