Looking for tips/specs to suit a 140 mid eighty cross flow. Its striped and ready for a rebuild a port job,
Years ago I did one with boost ports in the pistons but not shore if it helped or not.
Looking for tips/specs to suit a 140 mid eighty cross flow. Its striped and ready for a rebuild a port job,
Years ago I did one with boost ports in the pistons but not shore if it helped or not.
Found one of my old pistons.
The cross flow (super strangler / stinger gp, V4 racing pistons had a Scallop cut in the bottom of the piston on the intake side, w/ the block machined to match.
Get in touch with Danny Pigott on here & he has a wealth of knowledge on these motors.
His dad (POP) used to build a bad strangler / GP.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks