Thanks Thanks:  0
Likes Likes:  0
Results 1 to 8 of 8

Thread: OMC pistons needed

  1. #1
    Team Member
    Join Date
    Dec 2005
    Location
    Antioch, Il
    Posts
    377
    Post Thanks / Like

    Default OMC pistons needed

    Looking for a pair of 384806 OMC pistons. Deflector dome, approximately 3.500" with a 5/8" pin bore, high ring pressure back style rings, scalloped skirt intake side ....I would appreciate any leads. Thank you.
    Bill 847-845-4857

  2. #2
    Team Member
    Join Date
    May 2008
    Posts
    148
    Post Thanks / Like

    Default Piston

    384806 is not a "Good" PN? What is the application.

  3. #3
    Team Member
    Join Date
    Dec 2005
    Location
    Antioch, Il
    Posts
    377
    Post Thanks / Like

    Default

    Greg, thanks for checking. They are for a KC13R, here is a picture of one, later I will scan the parts book.

    I am still trying to find out the .020 over part number, for some reason OMC didn't list it in the book. I would rather have the oversize ones, my bores are a little sloppy, as you can imagine, but not scored.
    Attached Images Attached Images   

  4. #4
    Team Member
    Join Date
    May 2008
    Posts
    148
    Post Thanks / Like

    Default Pistons

    Good News is I found the number in an old Parts Book. Price was $5.62 in 1973. I do not have any but might in some of the stuff I got from Cees - I have just not gone through it all and it is stashed away in the back of my warehouse right now. Can you scan and send me the Parts Book for the Motor - that might help - and maybe I can dig up some other stuff out of my inventory that people might need.

    E-Mail it directly to swmjake@aol.com

    Thanks,

    Greg

  5. #5
    Team Member
    Join Date
    Dec 2005
    Location
    Antioch, Il
    Posts
    377
    Post Thanks / Like

    Default

    Thanks! that would be great if you could check Cees' stuff, good possibility that there are some there.
    you should have the scan in a couple of days.

  6. #6
    Team Member
    Join Date
    Dec 2005
    Location
    Antioch, Il
    Posts
    377
    Post Thanks / Like

    Default

    Quote Originally Posted by brichter View Post
    Looking for a pair of 384806 OMC pistons. Deflector dome, approximately 3.500" with a 5/8" pin bore, high ring pressure back style rings, scalloped skirt intake side ....I would appreciate any leads. Thank you.
    Bill 847-845-4857
    I still haven't given up! I appreciate any help and leads in finding these rare pistons. Also need the .020 counterpart to these, look for the scallop in the skirt and please ask if you aren't sure. Thanks in advance for your help! Bill 847-845-4857

  7. #7
    Team Member
    Join Date
    Dec 2005
    Location
    Antioch, Il
    Posts
    377
    Post Thanks / Like

    Default

    Quote Originally Posted by steve larkin View Post
    I'm sure I have them . Do what nos or used std or oversize , how many ?
    I'll take one or six, or more! I have my main powerhead and a spare block I want to put together but I only have two pistons (new) that are good. NOS or good used pistons are fine! Let me know what you have. Thanks! Bill 847-845-4857

  8. #8
    Team Member baldad45's Avatar
    Join Date
    Aug 2005
    Posts
    69
    Post Thanks / Like

    Default

    Quote Originally Posted by brichter View Post
    I'll take one or six, or more! I have my main powerhead and a spare block I want to put together but I only have two pistons (new) that are good. NOS or good used pistons are fine! Let me know what you have. Thanks! Bill 847-845-4857
    Bill did you get the pistons you are looking for ?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. wanted: OMC V4 pistons
    By brichter in forum Parts and Accessories
    Replies: 1
    Last Post: 11-13-2016, 08:48 AM
  2. Wanted: OMC pistons....
    By brichter in forum Parts and Accessories
    Replies: 0
    Last Post: 07-30-2010, 05:40 PM
  3. Saving old parts: slightly oversize pistons.
    By smittythewelder in forum APBA Stock and Classic Outboard Division
    Replies: 11
    Last Post: 08-13-2007, 01:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •