Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 12

Thread: SST60 - Stinger powerhead/adapter/tower question

Hybrid View

  1. #1
    Team Member TBuck2003's Avatar
    Join Date
    Feb 2007
    Posts
    21
    Post Thanks / Like

    Default SST60 - Stinger powerhead/adapter/tower question

    Is it possible to put a SSt 60 Powerhead and adapter plate on a Stinger short shaft mid section. Looking at different options for more power. Thx,

    Todd
    Last edited by Mark75H; 10-29-2010 at 02:57 PM.

  2. #2
    Team Member ima75man's Avatar
    Join Date
    Jun 2007
    Posts
    437
    Post Thanks / Like

    Default

    Quote Originally Posted by TBuck2003 View Post
    Is it possible to put a SSt 60 Powerhead and adapter plate on a Stinger short shaft mid section. Looking at different options for more power. Thx,

    Todd
    one of the best moves you can make.tons of bottom end power, mid range is good also
    out front again

  3. #3
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    An even better idea is to put the subject/question in the title of your thread rather than random punctuation marks.
    Since 1925, about 150 different racing outboards have been made.


  4. #4
    Team Member TBuck2003's Avatar
    Join Date
    Feb 2007
    Posts
    21
    Post Thanks / Like

    Default

    Quote Originally Posted by Mark75H View Post
    An even better idea is to put the subject/question in the title of your thread rather than random punctuation marks.
    So Sorry

  5. #5
    Team Member
    Join Date
    Nov 2008
    Location
    Horseshoe Bend, ID
    Posts
    657
    Post Thanks / Like

    Default Different studs

    Quote Originally Posted by TBuck2003 View Post
    Is it possible to put a SSt 60 Powerhead and adapter plate on a Stinger short shaft mid section. Looking at different options for more power. Thx,

    Todd
    On the powerhead swap you'll need to ream out through holes - the 56.6 uses 3/8" studs instead of the 5/16" used on 49.9's.

    Tim

  6. #6
    Team Member proprider01us's Avatar
    Join Date
    Apr 2005
    Location
    indianapolis indiana
    Posts
    46
    Post Thanks / Like

    Default Hibernation

    Hey Tim, good to see you come out of summer hibernation, Look forward to reading your posts this loonngg winter season.

  7. #7
    Team Member
    Join Date
    Nov 2008
    Location
    Horseshoe Bend, ID
    Posts
    657
    Post Thanks / Like

    Default Time to make chips

    Thanks Joe,

    You're rig's looking nice! Be sure to check out the F.Pierce Williams site. Some nice images of you at Dayton.

    Tim

  8. #8
    Team Member TBuck2003's Avatar
    Join Date
    Feb 2007
    Posts
    21
    Post Thanks / Like

    Default Powerhead swap

    Thanks Tim I appreciate your input, and explanation.

    Todd

  9. #9
    Team Member TBuck2003's Avatar
    Join Date
    Feb 2007
    Posts
    21
    Post Thanks / Like

    Default Powerhead swap

    Tim, I understand I think what you are saying, but I am looking at using the SST 60 P-Head, adapter plate, with the SST 60 Tuner. Sorry if I am not explaining the right way or being confusing...

    Todd

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •