Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: 100 block

  1. #1
    Team Member
    Join Date
    Aug 2008
    Posts
    65
    Post Thanks / Like

    Default 100 block

    all the 45ss sifu....can you guy explain why the 100 block is always be the best choice in 45ss?

  2. #2
    modifiedoutboard OUTBOARDER's Avatar
    Join Date
    Sep 2008
    Posts
    209
    Post Thanks / Like

    Default 326100 Block

    Exhaust/Transfer Port window/body heights and widths are on the good side of the specs.
    ANTHONY McCULLOCH
    modifiedoutboard@hotmail.com

    Some things never change!

    They Want it cheap..............

  3. #3
    Team Member
    Join Date
    Sep 2006
    Location
    manteca, ca.
    Posts
    0
    Post Thanks / Like

    Default

    the reason they like them is because the factory used to grind the casting slag out of the port hole, so even though you are not supposed to remove any casting, the factory did so it made it a ball and strike rule. Some of the prominent engine builders were able to make the motors better than they were by grinding just a ''little'' more than stock. However if you didnt have one of his motors and it looked like your motor was too good it was just plain illegal. It kinda mattered who you were and who built your motor. The best motor I ever had was a 207 anyway.

  4. #4
    Team Member
    Join Date
    Aug 2008
    Posts
    65
    Post Thanks / Like

    Default 100 block potential

    thanks for the opinion. i heard ron can build 70hp+ pump gas on these motors.anybody know whats the most can we dig out from these block?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 44 merc
    By seaward in forum Technical Discussion
    Replies: 8
    Last Post: 01-16-2010, 03:25 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •