Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Hill Marine Casting Signature Propellers

  1. #1
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Hill Marine Casting Signature Propellers

    28 sets of Bravo One five blades today...15 1/8 diameter.....Sure warmed the shop up!

    We poured 700 pounds of propellers today...Hill Marine makes them in AMERICA!
    Attached Images Attached Images
    Last edited by Ron Hill; 11-27-2018 at 05:06 PM.

  2. #2
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Never Had Secret, All My Life...

    Hill Marine is like the Hill Family. We never had secrets. We always told people exactly what we did and how we di it. We'd built them a boat, a motor or a prop...or sell them ours.

    Most companies reflect the founders beliefs. Hard work, love, dedication, luck....make companies grwo.


    We usually use VIRGIN, meaning new 15-5. Remelts are usually harder, so we save our remelts of MUD Motor weedless propellers as they run in the mud and the harder the better there!

    We can cast aluminum and brass, but are finding sand cast aluminum is easier and cheaper...
    Nose cones are made from aluminum...

    One secret, the casting comes out like the wax, therefore the waxes need to be perfect before dip.. This is why Hill Marine made their wax room a controlled temperature room and the dip room is also a controlled temperature room.

    Some of Hill Marine's customer's motor must be with in 200 RPM or it will void their warranty. Therefore these props need to be on the money, almost like good forging.
    Attached Images Attached Images
    Last edited by Ron Hill; 11-27-2018 at 05:05 PM.

  3. #3
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Signature Propellers by Hill Marine: We're At It Again!!!!

    8 down and 18 more to pour tonight....

    Signature Five Blade Bravo I Propellers by Hill Marine are working really well on gas powered twin engine boats, boat with blowers, and diesels. 15 1/8 diameter, plus wider blades, plus MORE blades....Hill Marine's SL5's... for Bravo One outdrives...

    See www.hillmarine.com or www.hillmarine.net for more information!
    Attached Images Attached Images
    Last edited by Ron Hill; 11-27-2018 at 05:01 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •