bass machines midsection and gear box ?

[thunderstruck]

hi

i was wondering if the bass machine tohatsu mid and gearbox will fit a tohatsu 15/18 hp powerhead ?
if not is there a substitute that would ?
thanks

[mercguy]

hi

i was wondering if the bass machine tohatsu mid and gearbox will fit a tohatsu 15/18 hp powerhead ?
if not is there a substitute that would ?
thanks

it could with the proper powerhead adaptor plate (assuming you wanna run the exhaust through the tower), but would be an overkill for that small of a motor!!!!! The OMC A/Sidewinder gearcase would be a better alternative and could be adapted to your stock exhaust housing.........if you want a direct drive racing type gearcase........or, if you do not mind NOT having a water pump, a Yamato 302 gearcase is a VERY affordable unit and adaptable to various exhaust housings also....

[JohnsonM50]

It would be overkill but could work. No where near to rpm, speed & stress its designed for but that means it will last. If you adapted a smaller gear case more in line with that motor size might be lighter & faster. The Bass tower with thru mid exhaust & pump is the best bet. You could run into the tower walls being in the way of the power head mount bolts in which case you would need an adapt plate. Or if lucky you might bolt it straight down on the tower.

[thunderstruck]

hi
could the gearbox be run in rh rotation or left hand only?
thanks for all your input guys
at the minute i am getting 45 mph with a stock 18 tohatsu with nose cone and a race prop

[joe ross]

Try keying in fralick outboard motors. They had merc 15hp racing gear cases might interest you. Cheers Joe

[Bob Snider]

We sale mid sections and exhaust. If your interested you can contact my brother at 573-552-2953. His name is Tim Snider