we raced these boats for boat race this weekend,,,he used nitros oxide and i used an engine anthony m. built,,,hehehe..,,,,came in first place,,,will have a rematch this week,,,betz are on,,,drag race!!!!!
osa!!!!!!
we raced these boats for boat race this weekend,,,he used nitros oxide and i used an engine anthony m. built,,,hehehe..,,,,came in first place,,,will have a rematch this week,,,betz are on,,,drag race!!!!!
osa!!!!!!
Video ......... we need video.......nice boats how fast yall running with them 45 motors.
here is dah vids,,,but none of our actual race!!!!
http://www.youtube.com/watch?v=gnqr7C2jcuY
osa!!!!!
Looks good! Is it a straight bottom or a little hook at the transom? If you could get it to hamg a little higher to stop the porpoising, it would be awesome...............
Charley Bradley
ok,,,the nose cone bullet was 1 1/2 inches below the flat pad,,,i just raised it up even with the bottom of the boat so im gona test it tomorrow,,,oh one more thing,,,,the nose cone bullet is 3 1/2 inches from the tramsom in distance!!!
tks,,,osa....
I probably wouldn't go that high. stay around 3/4 to 1 inch below the bottom and kick it out a little more. You should be able to use all the throttle before you can steer it. I used to have a 17' Hydrostream with a tricked out Suzuki 140 and had to hit the throttle and trim button at the same time. By the time I reached 70 mph+ I could steer it.........and it would get there in a hurry. Set up just below the bottom with a nose cone and pulling a 32" Raker prop @ 8000 rpm. Not bad for a rice burner.
Charley Bradley
Im thinking since you run some ruff stuff that depth is good but less than 1 1/2" might be faster & still drivable. It looks like your tabs can adjust [on the fly?] They can compensate for tilt a little & keep ya from launching in case your a bit far out but tilt & tabs in the right place working together.. sweet spot.
Last edited by JohnsonM50; 07-08-2011 at 07:32 PM. Reason: unfinished
ANTHONY McCULLOCH
modifiedoutboard@hotmail.com
Some things never change!
They Want it cheap..............
well your right about being a lil below the transom cause today when i test it,,,it was reving out when it hit choppy water so i dropped it down and it worked better,,,as far as the tak goes,,,i got a 7k tak today and i juss finished installed it....(Anthony M.),,,ill let you know the reading tomorrow after we lake x it...tehe...the prop im running have numbers on it but i really dont know the pitch,,,so ill try to display all the info i have by tomorrow evening...
tks,,,osa.....
ANTHONY McCULLOCH
modifiedoutboard@hotmail.com
Some things never change!
They Want it cheap..............
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks