racing lower units

[wholtzclaw]

just a quick question;

Does the 45ss lower unit fit any other HP Evninrude motors?

Are there any small hp (15-35) racing motors?

I'm a newbie to a lot of this stuff, and I'm just curious.

Thanks
Wayne

[Mark75H]

No it fits only the 45SS

There are many other racing lower units made for 6 to 60 hp made in the past and a few in current production. Most are scarce and in high demand

[wholtzclaw]

So, what lower racing units are currently made? Just for the big stuff?

Guess it's just too much of a 'niche market below the 45ss,... interesting, would be great to see some increased involvement from one of the big OB manufacturers(?) To target the smaller racing series(?)

Wayne

[Mark75H]

The smallest is the Sidewinder/APBA former OMC 15SS unit.

Next is the small Komato unit made by Jim McKean, then Jim's larger Kamato. These are derived from the Yamato Hatchet used on motors from about 10 cubic inches (125cc) to 45 cubic inches (700cc).

Pavel Koncy (Konny) and GRM (Rossi) make racing motors the same sizes with their own racing lower units.


The only manufacturer interested in making smaller motors equipped with a racing lower unit is Selva in Italy. The big guys are probably done forever ... but that just opens the door for someone else ... it always has in the past.

I'd say watch for something from China in the coming decade.

[wholtzclaw]

Thanks for the information; we'll see what happens in the next few years;

I'd love to see a gear case that fit 35hp and under JohnnyRudes,

Or something for a new E-Tec or something....

Anyway, time will tell, thanks again for the info

Wayne

[Mark75H]

I don't think there will ever be lower units like that again. You will always have to hand machine adapters to cross fit from other small makers and hot rod shops.

[Randy Aveline]

just a quick question;

Does the 45ss lower unit fit any other HP Evninrude motors?

Are there any small hp (15-35) racing motors?

I'm a newbie to a lot of this stuff, and I'm just curious.

Thanks
Wayne

yes there are several omc 15 to 25 hp racing engines and you can buy them straight from OMC the (15hp) and can even get a racing lower unit upgrade and come race stock outboard in 1 of the largest classes in stock outboard

Another option for you, Wayne is to go to www.hydroracer.net and look in the mod,stock,pro for sale area, as there lots of units being sold there all the time and they can be adapted for what you need or want, also there is plenty of info regarding people that will help you or even send you to the right man to assist in the transition ,

one thing you need to be careful of is, Do you need a unit that will pump water or is your application of the nature that you can use a force fed water set up.. many of the after market unit we racers are using now is a force fed water set up ,if your running a 3 or 4 cylinder engine you have to be running about 40 just to force water to the upper cylinder if it takes too long for you to get to that speed you may need to opt for a unit that has a built in water pump to be sure your engine is cooling properly in all critical areas !!

hope this helps
regards to all
Randy 23-H

[Mark75H]

yes there are several omc 15 to 25 hp racing engines and you can buy them straight from OMC the (15hp) and can even get a racing lower unit upgrade and come race stock outboard in 1 of the largest classes in stock outboard

I am not aware of these motors. Can you tell us the model number, price and how to order them?

I think you are referring to the out of production 15SS and 45SS which he already knows about, but can't buy "straight from OMC" or any other place except hunting down a used one.

[audiobill5]

hi,
other than the forced water pump wouild a streamlined gearcase only be of the non-shiftable type?
I've been thinking of a smaller gearcase/shiftable 15 inch unit for my '77 JonaRude 50hp fishin' mota.

thanks

[JohnsonM50]

hi,
other than the forced water pump wouild a streamlined gearcase only be of the non-shiftable type?
I've been thinking of a smaller gearcase/shiftable 15 inch unit for my '77 JonaRude 50hp fishin' mota.

thanks

Those do have a HUGE gear case, The smaller OMC cases would probably blow out the sides in less than10 minutes LoLs There, a 45 case would be cool.