bottom contour

**Detroit Whitey** · 09-23-2011

i have a question I`am sure somebody on here has tried contouring a running surface what are the pro`s and con`s can a ruffed up lets say v bottom pad be faster than a ultra smooth pad?

**zul8tr** · 09-23-2011

Here is a link with some discussion on furface texture

http://www.boatracingfacts.com/forum...+sanded+bottom

**Detroit Whitey** · 09-23-2011

thanks for that link after reading all the post sound`s like there is no hard yes or no.Years ago i had a knee board that had dimples the size of golf balls formed into the bottom and it was faster than one without so i thought i would ask to see if this had been done

**Binger** · 09-23-2011

my understanding is the less wetted surface the better, im sure there is a point were stability comes into that factor.

**zul8tr** · 09-24-2011

Originally Posted by Detroit Whitey

thanks for that link after reading all the post sound`s like there is no hard yes or no.Years ago i had a knee board that had dimples the size of golf balls formed into the bottom and it was faster than one without so i thought i would ask to see if this had been done

At Hydroracer.net there are lots of discussion on friction reducers, dimples and sanded bottom. Using Search with "sanded borttom" here is the list:

http://www.hydroracer.net/forums/sea...earchid=575297

This one in the list had a lot of good info

http://www.hydroracer.net/forums/sho...=sanded+bottom