Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Bill Fales video 1970 APBA Nationals

  1. #1
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default Bill Fales video 1970 APBA Nationals

    First video from Steve Fales:

    Since 1925, about 150 different racing outboards have been made.


  2. #2
    Team Member
    Join Date
    Jan 2012
    Posts
    5
    Post Thanks / Like

    Default The Video

    The video above was filmed during the 1969 and1970 APBA Nationals in Depue. It was filmed with an 8mm wind up camera by my mom. Sorry about the blurred vision, lack of sound, and distance from the the course.

    The reason I posted the video was because of a story that my dad used to tell about the second heat of the 1970 Nationals. Before I get to that, he used to tell me that the power of the deflector he used to win the 1968 and 1969 Nationals had nowhere the power the looper he had in the 1970.

    I know it might be tough to veiw, but in the second heat of the 1970 race, he actually entered the first turn in last place. He and Rich Fuchlin were way up the course kind of looking around at each other and not paying attention to the clock. So off to the first turn they went with Rich just ahead of my dad. This is the part of the story I always liked, my dad said that this was the ONLY race he EVER ran that looper at full throttle. He did pass the entire field, including Chuck Waite (who did not have a deck rider), and go on to win the race. At the end my dad looks tired. He looked that way not only because it was a tough race for him, but also because he was scared. He said the power of that motor took the life out of him.

    My dad always believed in his loopers and cherished those motors until he passed away. He did always say that the power of Lon's motors were extreme, and followed that with the phrase, "you can never compete against inches"! And Lon's motors have inches.

    He would love to see this rebuild, and would wish you best of luck during the time you move forward. Good luck J-Dub. I know my dad is watching.

  3. #3
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default

    Thanks for the story Steve. I'm going to look at it again, knowing what you just said. I like the pit shots too. Looks like maybe a Crescent in the pits in the first part. I'm curious too about a motor being cranked up toward the end that looked like some cylinders were popping before everything caught. My eyesight sometimes tricks me, but it looked like the megphones were straight out to the left and they kind of reminded me of the look on one of Hu Entrops Evinrude V4's. Was that a V4 turned 90 degrees clockwise, or am I seeing an optical illusion?

    Also how did you send that to Sam to post? Was it transferred to a DVD? Looking forward for more.



  4. #4
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    i did nothing. Steve uploaded the video to YouTube and I started the thread and linked it in.

    we are having a technical problem with the discussion board software that is preventing everyone from directly uploading video to BRF - but the set up in this thread (uploaded to YouTube and linked in) is the preferred way to do video on BRF anyway. When we get the software straightened out, that's what I will do with future video uploads.

    I opened a YouTube account for BRF just for this. It will increase both BRF's exposure on the net and boat racing in general.
    Since 1925, about 150 different racing outboards have been made.


  5. #5
    Team Member Master Oil Racing Team's Avatar
    Join Date
    Jan 2005
    Location
    Sandia, Texas
    Posts
    3,831
    Post Thanks / Like

    Default

    Is it easy to do Sam or should I send my DVD to you?



  6. #6
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    Its easy but you might have some trouble on a cloudy day.

    I'd say give it a try and see how it goes
    Since 1925, about 150 different racing outboards have been made.


  7. #7
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Is DePue 1970?

    I didn't see a Konig anywhere. Pretty cool pitucres, wish I could them better...

  8. #8
    Team Member
    Join Date
    Apr 2005
    Posts
    62
    Post Thanks / Like

    Default

    Wayne I believe the engine with the pipes out to the side belong to Jim Gohery as that is his number. The engine was a Evinrude pumper or close to a 4-60. Jim still has this engine. I know Doug Bindrim had one just like it and maybe it is the same engine. Bob
    Bob Rusnak

  9. #9
    Team Member Gene East's Avatar
    Join Date
    Dec 2004
    Location
    Quincy, IL
    Posts
    593
    Post Thanks / Like

    Default

    The night before this race I shared a table with several deck riders. One was bragging about what he intended to do the next day.

    My comment was, "Yeah right, you're going to hold your ears when Bill Fales blows by you just like the rest of us".

    I think I saw him pass us on the front stretch in the video. Not positive other than it was a yellow boat.

    Racing against Bill Fales was a thrill for me even though I was just the second man in the boat!

  10. #10
    BoatRacingFacts VIP racingfan1's Avatar
    Join Date
    Jul 2007
    Location
    Bradford , Illinois
    Posts
    1,329
    Post Thanks / Like

    Default Where else ?

    Not all this video was shot at DePue , or am I wrong ?. It looks like the first part is from a different race site because of the houses in the back round and the pit area looks different?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. APBA National Meeting honors champions, sets turnaround agenda
    By AZOutlaw in forum Boat Racing Encyclopedia
    Replies: 0
    Last Post: 02-01-2010, 09:14 PM
  2. Lets put Bill Fales in APBA HOF
    By N-77 Two in forum Boat Racing Encyclopedia
    Replies: 2
    Last Post: 03-16-2005, 09:05 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •