would these be the right carb numbers for 40hp mercury

[Nason]

Here is the motor I have 2005 40 hp 2 stroke triple
here is what is listed on the plate:
2005 elpto
serial # 1B018460
model # 1043412DD

can someone tell me if these 60 carbs will mount up on my motor
top carb # 821854T22
middle carb # 821854T23
bottom carb # 821854T24
reed block assembly # 190754A3
reed kit # 812880A03
is there any other parts I would need to put on these carbs if they are correct.These would be new carbs from mercury.
Thanks for any help.

[25XS]

Does your 40hp have WME-53 or WME-92 carbs on it now..?

With all the blown up 60hp Mercury's out there, why not just by a complete front half and rebuild the carbs yourself? That way you get all the carb linkages, the right airbox (attenuator), primer solenoid w/fuel lines to show routing to duplicate, and reedblocks... All for pennies on the dollar...

Check with Outboard Recycle in Alabama... http://www.obrparts.com/
They may have core powerheads with broken cranks and wrecked blocks and might sell you a complete 60hp front half for cheap.

Good luck.

Tom

[Nason]

thanks for the info

[Nason]

Does your 40hp have WME-53 or WME-92 carbs on it now..?

With all the blown up 60hp Mercury's out there, why not just by a complete front half and rebuild the carbs yourself? That way you get all the carb linkages, the right airbox (attenuator), primer solenoid w/fuel lines to show routing to duplicate, and reedblocks... All for pennies on the dollar...

Check with Outboard Recycle in Alabama... http://www.obrparts.com/
They may have core powerheads with broken cranks and wrecked blocks and might sell you a complete 60hp front half for cheap.

Good luck.

Tom

Hello Tom,
yes the carbs that are on now are WME - 92

[25XS]

Hello Tom,
yes the carbs that are on now are WME - 92

For brand new carbs, unless you're getting them way under dealer cost, you're spending alot of money to possibly not get everything required to convert the 40hp to 60hp...

Tom