Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 12

Thread: Looking for information on Yamaha model 62F..50 HP

Hybrid View

  1. #1
    Team Member
    Join Date
    Dec 2004
    Location
    Toronto, Canada
    Posts
    96
    Post Thanks / Like

    Question Looking for information on Yamaha model 62F..50 HP

    I won this power head [long block] in a British auction. It is 50 hp, 3 cylinders ,but, it is not 43 cubic inches like the normal 40 and 50 horsepower Yamahas we see over here. It has a serial number 100189 on the block. It looks a lot like a 70 6H3 or 6H1 block. The papers I got with it say it had a 14:24 gear case, a 11 3/8 x 12 pitch prop, 4500 to 5500 rpm operating range and a compression of 6.30. The documents look totally Yamaha. I am at a loss with the 62F code. It doesn't match the normal Yamaha outboard codes. They go "number”,” letter", "number" [example 6H3] This motor is 62F! Anyone know what I have here?
    thanks
    Don

  2. #2
    Team Member
    Join Date
    Dec 2004
    Location
    Toronto, Canada
    Posts
    96
    Post Thanks / Like

    Default

    So far I have found out the motor is a 1993 model 50 hp. Called a 50G. It came in two versions. A short shaft and a long shaft. I would appreciate seeing a picture of one. The model was not sold in North America. I think it must have a lower unit same as the 2 cylinder 55 hp motor.

  3. #3
    BRF Team Europe Member
    Join Date
    Feb 2005
    Location
    Paris, France
    Posts
    0
    Post Thanks / Like

    Default

    Yes, in Europe the 850cc block was used on the 50G (62F), 60F(6H2) & 70B(6H3).
    Attached Images Attached Images  
    Argo Cat 18 - Sold
    Merc 2.4EFI/CLE - Sold

  4. #4
    Team Member
    Join Date
    Dec 2004
    Location
    Toronto, Canada
    Posts
    96
    Post Thanks / Like

    Default

    Thanks French Phil, I have a parts book coming from Britain, so I will able to check. I did get an email as well. The sender says serial number I have is from a short shaft model ?

  5. #5
    BRF Team Europe Member
    Join Date
    Feb 2005
    Location
    Paris, France
    Posts
    0
    Post Thanks / Like

    Default

    Both short & long were available. What boat will you pair with the 50 ?
    Argo Cat 18 - Sold
    Merc 2.4EFI/CLE - Sold

  6. #6
    Team Member
    Join Date
    Dec 2004
    Location
    Toronto, Canada
    Posts
    96
    Post Thanks / Like

    Default

    French Phil, I may have really lucked out with this power head. We race T Class in this area. Our rules are a little different which gives me an interesting option. We normally race
    a 70 CES yamaha on a Critchfield in T850 class. To help the T750 class grow , we planned to run a 50D Tohatsu on a different boat. Now if this 50G Yamaha power head fits on the 70 CES mid, then I only need to change the powerhead on the T850 boat. Our Fair Competition Rule will allow this 50 hp in the T750 class eventhough it is a larger cubic inch. The T850 boat is over 150 lbs heavier than a normal T750, so it may not be competitive. But it is worth a try. Plus it gives us an additional boat a new T750 racer can try. Plan B would be to sell the motor to a Thunder Cat racer up here.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 40/50 yamaha tiller on 30 yamaha??????
    By BRzuki in forum Technical Discussion
    Replies: 7
    Last Post: 09-06-2014, 05:58 PM
  2. 13' Biel Tunnel with Yamaha 130
    By Mr. Demeanor in forum Boat Racing Encyclopedia
    Replies: 6
    Last Post: 02-15-2011, 08:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •