Does the carrier on the nitro case Ned to be pinned when run on the surface. Don't need to spin it in my brandy new unit!!
Does the carrier on the nitro case Ned to be pinned when run on the surface. Don't need to spin it in my brandy new unit!!
i used to pin them but if it`s not done right you can pull the carrier out of center and cause internal damage over time cracking of the carrier and leaking are all part of that deal.Use a good hi grade adhisive like the gray stuff from yahama works well forgot the part number but have not had a problem since i stoped pinning them.
Tell me more about that adhesive I want to secure the center main reed cage on an early 73 Merc 25SS - 22 c.i 2 cylinder split case. Do you still have a tube so a pic or PN can be obtained.
Just found this on I Net might this be it?
http://www.ebay.com/itm/Yamaha-Yamab...b45f3c&vxp=mtr
Thanks
yes it was a yhama bond but what one not sure the color was gray when i get to the shop i`ll look
Its called yaham bond 4 this is the part number ACC-BOND4-MA-00
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks