Thanks Thanks:  0
Page 6 of 10 FirstFirst 12345678910 LastLast
Results 51 to 60 of 92

Thread: Evinrude 31.8ci Mod Advice

  1. #51
    Team Member
    Join Date
    Oct 2005
    Posts
    22
    Post Thanks / Like

    Default

    I would be very interested in some stacks if the OP is not.

    Thank you

  2. #52
    Sabine River Gang MWhite's Avatar
    Join Date
    May 2010
    Location
    Sabine River
    Posts
    606
    Post Thanks / Like

    Default

    Quote Originally Posted by captbone View Post
    I would be very interested in some stacks if the OP is not.

    Thank you
    captbone,,,emustard was the one that was interested in them stacks, i dont if he bought them are not. Bob snider was the builder of them hustler stacks and i think his son has took over his business now.
    Let it all Hang out

  3. #53
    Team Member
    Join Date
    Jan 2013
    Posts
    44
    Post Thanks / Like

    Default

    Update on how it is going
    Got the new prop last week 11x18 over hub cleaver, going to do some runs this weekend hopping for 40mph "so close". running a 5in jack plate really helps any other tips would be great?

    Here are some pictures
    Name:  IMG_1387[1].jpg
Views: 1391
Size:  174.2 KBName:  IMG_1385[1].jpg
Views: 1332
Size:  116.8 KB Name:  IMG_1379[1].jpg
Views: 1349
Size:  282.4 KBName:  IMG_1359[1].jpg
Views: 1384
Size:  149.8 KB
    Likes hydrospeed77 liked this post

  4. #54
    Sabine River Gang MWhite's Avatar
    Join Date
    May 2010
    Location
    Sabine River
    Posts
    606
    Post Thanks / Like

    Default

    Quote Originally Posted by Emustard View Post
    Update on how it is going
    Got the new prop last week 11x18 over hub cleaver, going to do some runs this weekend hopping for 40mph "so close". running a 5in jack plate really helps any other tips would be great?

    Here are some pictures
    Name:  IMG_1387[1].jpg
Views: 1391
Size:  174.2 KBName:  IMG_1385[1].jpg
Views: 1332
Size:  116.8 KB Name:  IMG_1379[1].jpg
Views: 1349
Size:  282.4 KBName:  IMG_1359[1].jpg
Views: 1384
Size:  149.8 KB
    Emustard, did u buy them stacks for that engine???? that prop looks good, u headed in the right direction, but i believe u could stand alittle more pitch,and diameter to at that motor height u running,, the guy thats got the stacks can fill u in on what he had and he may still have that prop he run.
    Let it all Hang out

  5. #55
    Team Member
    Join Date
    Jan 2013
    Posts
    44
    Post Thanks / Like

    Default

    I did not end up buying the stacks. I wanted to, but I run this motor every weekend and would probably get shot for being to loud LOL people already think I am to loud. on the weekend we did a little bit of running on the weekend and hit 38mph at 5500 into the wind. still had about another 200rpms but ran out of room and waves were to big.

  6. #56
    Team Member
    Join Date
    Apr 2005
    Location
    Massillon, OH
    Posts
    24
    Post Thanks / Like

    Default

    Who made the cleaver ?

  7. #57
    Team Member
    Join Date
    Jan 2013
    Posts
    44
    Post Thanks / Like

    Default

    Ron Hill made the prop

  8. #58
    Team Member
    Join Date
    Jan 2013
    Posts
    44
    Post Thanks / Like

    Default

    Tested the motor this weekend ran a 41.2 mph, had it jacked all the way up and still had great water pressure so maybe put a shim or move the jack plate up an inch. We reached our goal so thanks everyone for helping and giving your input now everything else will be a bonus so maybe 50mph now LOL, will see.

  9. #59
    Team Member
    Join Date
    Jul 2018
    Posts
    26
    Post Thanks / Like

    Default

    Quote Originally Posted by Emustard View Post
    Tested the motor this weekend ran a 41.2 mph, had it jacked all the way up and still had great water pressure so maybe put a shim or move the jack plate up an inch. We reached our goal so thanks everyone for helping and giving your input now everything else will be a bonus so maybe 50mph now LOL, will see.
    Just curious as to how long that motor lasted with all the mods you listed? Have a ron hill 10.25X16 thru hub semi cleaver on it's way to me. Sure hope I can turn it.

  10. #60
    Team Member
    Join Date
    Jan 2013
    Posts
    44
    Post Thanks / Like

    Default

    Motor still runs great, don’t use it as much, but works well during hunting season. As long as you can get the motor up, you should have no problem turning that 16pitch

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. Advice on a PAD
    By chris3298 in forum Technical Discussion
    Replies: 15
    Last Post: 03-09-2013, 04:01 PM
  2. sst 45, need advice !
    By SUPERGLUE EXPRESS in forum Technical Discussion
    Replies: 9
    Last Post: 08-19-2009, 10:21 AM
  3. Looking for some advice
    By scott5sp11 in forum Technical Discussion
    Replies: 17
    Last Post: 08-29-2008, 07:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •