merc 59ci porting

[Fast Fred]

i'd use dikum ink, paint up the cyl at the exhaust window, put the bullets, rods and crank back in, no rings, no rings on the pistons. set the next case on snug. then scribe each cyl at bdc. i'd also check the skirt at tdc to make sure she would be coverd.

[fs5]

i'd use dikum ink, paint up the cyl at the exhaust window, put the bullets, rods and crank back in, no rings, no rings on the pistons. set the next case on snug. then scribe each cyl at bdc. i'd also check the skirt at tdc to make sure she would be coverd.

thanks mate,i didn't think of that,an open zorst port at tdc ...
appreciate your help.