Was checking this out -
How do you make the exhaust like that? Or do you just add a bit like in the picture?
How does it affect performance? The same as above prop exhaust?
thanks
Was checking this out -
How do you make the exhaust like that? Or do you just add a bit like in the picture?
How does it affect performance? The same as above prop exhaust?
thanks
on that Moda you would block off the drain in the bottom of the exhaust addapter
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
then drill and drain it on the side
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
makes it pull harder
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
I wonder how spraying a thermal barrier paint down the tube would help?
I'm sure some one can fill in the science on This in more detail (than me) It changes the sound pulse a bit in the exhaust from what I know some gain a bit of hp some not so much. The other thing is you're midsection is going to run hotter. Also you're water pump can melt from the heat if it's not protected.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks