Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: Turner Pistons

Threaded View

  1. #1
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Turner Pistons

    http://www.boatracingfacts.com/forum...turner+pistons

    My dad an Wally Tuner were good friends. https://www.google.com/search?q=Wall...w=1680&bih=925



    Y-116 Full House Mouse
    owner / driver Bob Foley
    location Escondido, CA
    hull info / class Original 48 ci class hydroplane (Y)
    Built in 1954 from Kenny Ingram plans by DeSilva
    LOA / beam 11' / 6'
    motor Four cylinder - Modified - Crosley 44 cu in, SOHC motor. 85 HP.
    .100" over bore, 2.6" ported, compression ratio 12.5:1.George Salih machined Turner cast pistons; full floating wrist pins with teflon buttons, boxed rods, forged steel crank, Crane 9000 cam, Crane cam followers & valve springs; lightened Crofton valves. Oil pump runs at 1/2 engine speed. Modified distributor, reinforced mounting tab for points. Usually ran crankshaft scraper; oil control was always a problem. Runs on Methanol through Amal 1.125" TT carbs. Two fuel pumps (Bendix), one for each carb. .125 needle jets, main jets from .101 to .109 with one jet size larger in front carb.
    gearbox direct
    propeller Oakland Johnson A SPl 7.75 x 12; Cary 8.5 x 13; Hi J 8 x 12; Hi J 8 x 13.5; Hi J 8.25 x 14.5
    years raced 1954-1979
    1954 - 1956(?) Sonny Meyer
    1958 - 1962(?) Mickey Remund
    1964 - 1967 John Lyle
    1967 - 1979 Bob Foley Competition Speed Record (5 mile): Nov. 6, 1954 - Salton Sea, CA - Sonny Meyer - Lou-Kay 99-Y - 67.72 mph.
    1960 Nationals (Remund) 3rd
    1961 Nationals (Remund) 4th
    1975 Winternationals West (Foley) 2nd
    1977 Nationals (Foley) 5th
    launch: land display
    Last edited by Ron Hill; 09-28-2014 at 08:36 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •