gots a Mod50 straight in , seems unmolested, so i'll use it to get the port map and transfer it to the 56er and or the jest of it
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
Yes sir, that's what I'm talking about, finger ports looks kind of short though.
Nice to see this thread rolling again.
What would a power head like this cost?
i don't have that number for you at this time MGR, i am keepin notes on it.
talk about deck height, soon. later, got to go do stuff,
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
so, one of the things needed to build such a moda is, a 56er motor, or the sum of those parts. so when you get that power head back to shop, pull the head. note where each piston crown lands at TDC, most will be flush with the deck, what i want is for the crown to clear the deck by .020, deck as needed. SST 60 spec i have is 6.375 deck height to min. 6.363
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
exhaust port transfer, the mapping ink is called DYKEM, get some................
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
the exhaust port is huge on the Mod 50 block..................... that bein why i'm lookin to uses it
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
subscribed keep the cards and letters coming
13 ft allison
14 ft allison
15 ft allison molds
16 ft allison
17ft tin fisher marine
(life is hard even harder if your stupid)
JOHN WAYNE
gots a caliper hear, usein the back side for inside diameter= id, the height of the port is locked in,
Part one of "Secrets of the OMC Mod 50" : http://www.boatracingfacts.com/forums/showthread.php?t=2052
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks