Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: D- MODIFIED Mercury 44 Later Model Anniversary Special Blocked Racing Outboard

  1. #1
    CANADIAN PRAIRIES REGION John (Taylor) Gabrowski's Avatar
    Join Date
    Dec 2004
    Location
    Winnippeg
    Posts
    1,496
    Post Thanks / Like

    Default D- MODIFIED Mercury 44 Later Model Anniversary Special Blocked Racing Outboard

    FOR SALE - Complete Mercury 44 Cubic Inch Class D - 4 cylinder -MODIFIED OUTBOARD DIVISION RACING OUTBOARD. *Mercury "Anniversary Special 500" engine, based on later (newer) Mercury 500 deflector/crossflow technologies. Block has cooler running longer reach spark plugs offset to the intake side of the combustion chamber and has shaped combustion chambers unlike the earlier Mark 58s-400s-450s & 500s where they had sparkplugs in the middle of the cylinder and little combustion chamber shaping.

    Stock powerhead rated Anniversary Special Merc 500 engine generated 50 horsepower at the prop as a ski/fish engine. As a D-Modified it has little time on it with piston rings just barely broken in.

    More Specs as follows:

    *Modified Outboard As Described as within typical rules on Class "D" Mod Mercs. Termed as the preferred D-Mod Merc block but little performance difference seen against older spark plug in center earlier engines.
    *Stock bore, finish honed block, accurate bore.
    *True tested straight Merc 500 (Class D outboard) crankshaft.
    *Balanced and honed Merc 500 (same as in Merc 44X racers) newest style "fractured big end" and "cap bolted" connecting rods .
    *Large opening reed blocks with "composite" (non-metal) reed petals.
    *Mercury 3 ring, large wrist pin later (newer model) stock bore pistons (.0065 inches piston to cylinder wall clearances).
    *New piston rings (just broken in) 3 rings X 4 pistons.
    *Originally equipped/engineered with and retained mounted Tillotson KC large bore carbs with fixed high speed jets. ( can be coverted to high speed needle jet system)
    *Quincy Welding for Mercury 4 cylinder classic twin piped/belled 2 into 1 elboed steel 4 cylinder exhaust system.
    *Mercury P4D red capped magneto & assembly ignition system.
    *Mercury light weight flywheel and rope plate starting system.
    *All Steel Welded Pipe type Tower with Merc clamps and saddle.
    *Mercury Mark 55H typical long skeg D class gearcase with 1 to 1 gears.
    *Chromed Mercury H type steering bar.
    *New gaskets, seals, bearings (end cap bearings feature newest type cooler running plastic race retainers), fuel pump parts and lines throughout.

    Price Is: $2,500.00 USD$ Firm. Shipping will be in high impact packaging and using UPS to deliver anywhere in North America based on cost and location somewhere around $200.00 in estimate.

    Email me at: anzani@mts.net

    Telephone weekday evenings and anytime on weekends at: (204) 667-3815

  2. #2
    CANADIAN PRAIRIES REGION John (Taylor) Gabrowski's Avatar
    Join Date
    Dec 2004
    Location
    Winnippeg
    Posts
    1,496
    Post Thanks / Like

    Default Modified Merc Engines And Parts All Sold

    Modified Merc Engines And Parts All Sold

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •