Thanks Thanks:  0
Page 4 of 4 FirstFirst 1234
Results 31 to 40 of 40

Thread: OMC 1 3/8" carbs

  1. #31
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by JohnsonM50 View Post
    Thats a stock manifold. I removed single carb studs & shaved the aluminum down till it had a flat surface big enough to accept the 85hp 2 barrel carb. I made an adapter plate with 4 studs to mount the carb. There is a center block epoxied into the stock manifold to separate the barrels, 1 each cyl. The adapter plat is epoxied onto the cut manifold & thru screwed where the manifold studs were. a couple are under the carb so I used flat head SS screws there. It sealed right 1st try & ran 1st try. Next is going to be a V block reed set up but that will be more difficult. When done it will drastically reduce crank case volume & eliminate the pre historic 'wall' of reed obstruction.

  2. #32
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by JohnsonM50 View Post

  3. #33
    Banned
    Join Date
    Nov 2016
    Posts
    289
    Post Thanks / Like

    Default

    stop posting photobucket pics, they dont come out any more unless you pay for it.
    none of these pics are now visible like they used to be.

  4. #34
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by filthy phill View Post
    stop posting photobucket pics, they dont come out any more unless you pay for it.
    none of these pics are now visible like they used to be.
    , Yeah, I just found that out. As far as posting tho, I'll post as I wish & leave it to the moderators to notify me or block posts if I'm off base. As far as what can & can't be done depends on who wants to -not who says you can't.

  5. #35
    Banned
    Join Date
    Nov 2016
    Posts
    289
    Post Thanks / Like

    Default

    Wow got a.mind of your own hey .

    That makes a change for USA and Canadian forums

  6. #36
    Team Member
    Join Date
    Mar 2014
    Location
    Florida
    Posts
    144
    Post Thanks / Like

    Default

    My nickname throughout high school and beyond was "Stick." I got that nickname as follows. I, at eighteen, was out running around town, late at night, with some buddies, and we were drinking massive quantities of Big Cat Malt Liquor. I, as usual, was passed out on the back seat of a '55 Chevy when the Cop pulled us over. Everyone got out, except me, because I was asleep, of course. The cop looked in at me and demanded, "Who is this?" One buddy said, "That's Steve," while another buddy said, "He's sick," at which point, the cop whopped me on the head with his flashlight and said, "Get out of there, Stick!" Thereafter, I was known as "Stick." How did you get to be known as "Filthy Phill"?

  7. #37
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by filthy phill View Post
    Wow got a.mind of your own hey .

    That makes a change for USA and Canadian forums
    Yeah I do, & for whatever it's worth it IS mine to entertain. If you weren't so busy telling others how it is according to you you might find there's many very high caliber folks here but instead you choose to insult them. How did you come by the statement "P people off"? because it seems on purpose.

  8. #38
    Team Member JohnsonM50's Avatar
    Join Date
    Apr 2005
    Location
    Jersey
    Posts
    602
    Post Thanks / Like

    Default

    Quote Originally Posted by Ketzer View Post
    My nickname throughout high school and beyond was "Stick." I got that nickname as follows. I, at eighteen, was out running around town, late at night, with some buddies, and we were drinking massive quantities of Big Cat Malt Liquor. I, as usual, was passed out on the back seat of a '55 Chevy when the Cop pulled us over. Everyone got out, except me, because I was asleep, of course. The cop looked in at me and demanded, "Who is this?" One buddy said, "That's Steve," while another buddy said, "He's sick," at which point, the cop whopped me on the head with his flashlight and said, "Get out of there, Stick!" Thereafter, I was known as "Stick." How did you get to be known as "Filthy Phill"?
    Good story Steve sounds like fun, not sure I want to know the answer to your Q tho LoL.

  9. #39
    Banned
    Join Date
    Nov 2016
    Posts
    289
    Post Thanks / Like

    Default

    at one point in the 1980's I worked on a good few tv and film sets and always carried a small video camera with me, at the time there was a fella in the usa called filthy phill who made porn films.
    the producer I was working with saw my camera and said "oh look its filthy phill" next thing the name stuck for a while.
    I had never heard of filthy phill and thought the producers was being very cheeky so went straight for him. other workers explained who filthy phill was then we all laughed it off.
    But the name stuck ha ha producer's name was Peter Bennet, the tv series was Minder with George Cole as its main star.

  10. #40
    Team Member
    Join Date
    Jul 2017
    Posts
    33
    Post Thanks / Like

    Default stock powerhead with 2bbls

    Name:  2bblsLAMBERTVILLE.jpg
Views: 245
Size:  41.7 KB

    added a lot of punch out of turns

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •