Page 33 of 33 FirstFirst ... 9101112131415161718192021222324252627282930313233
Results 321 to 330 of 330

Thread: Johnson "70mod"

  1. #321
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    250
    Post Thanks / Like

    Default

    Its bridgeport. I only have chamfer on sleeve area, havent raise the roof. Yes im aware of ECR, might go up a little in that. I have to find prop to take rpms down to ~7500 in wot.

  2. #322
    Team Member
    Join Date
    Nov 2016
    Posts
    394
    Post Thanks / Like

    Default

    not so sure exactly what you are now saying..
    so the clear this up a bit . are you saying
    1/ this port height is 1.382 the top of the chamfer to the deck ?
    or are you saying
    2/ the actual top of port height is the 1.3820 not including chamfer ?

    sorry for the confusion, but something is not translating right here.

    .

  3. #323
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    250
    Post Thanks / Like

    Default

    45* chamfer on sleeve area, upper edge 1.382 from deck. Port roof untouched.
    Attached Images Attached Images  

  4. #324
    Team Member
    Join Date
    Aug 2017
    Posts
    17
    Post Thanks / Like

    Default

    I never make the chamfer to the deck less then 1.400. The real port is lower yet. I don't raise that at all. I leave stock and do all the work with the chamfer. Raising the root of the port kills bottom end. The engine will rev great with that so going higher only reduces torque.
    Phil could not get your message. email wpt1mike@gmail.com

  5. #325
    Team Member
    Join Date
    Aug 2017
    Posts
    17
    Post Thanks / Like

    Default

    I wish I knew how to make an attachment, I could supply drawing or photo.

  6. #326
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Location
    Orlando, Fla
    Posts
    665
    Post Thanks / Like

    Default

    Quote Originally Posted by Mike Wienandt View Post
    I wish I knew how to make an attachment, I could supply drawing or photo.
    Mike

    If you have a photo or sketch on your computer in a folder you can easily grab it. When you make a post on lower right is a Go Advanced tab left click and a screen opens, scroll down for Manage Attachments and left click, in upper right is a (+) Add Files tab when you left click than left click Select Files at the bottom than you can browse to the location on your computer for the picture or sketch PDF file. Make sure pictures are not too many Mb keep JPG pictures less than 0.488 Mb and PDF sketch less than 2.38 Mb.

    Hope this helps?

    Pete
    “Extraordinary claims require extraordinary evidence” Carl Sagan

    Location: SW Orlando, Fl

  7. #327
    Team Member
    Join Date
    Nov 2016
    Posts
    394
    Post Thanks / Like

    Default

    ah you only put a chamfer on the sleeve and not raised the original port height .

    I see.

  8. #328
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    250
    Post Thanks / Like

    Default

    Quote Originally Posted by Mike Wienandt View Post
    I wish I knew how to make an attachment, I could supply drawing or photo.
    I cant either with computer.
    This is why i do all forumwork with my Honor7, everything goes like snap of a finger😂😂!

  9. #329
    Team Member
    Join Date
    Nov 2016
    Posts
    394
    Post Thanks / Like

    Default

    easy if you look at the box and use basic uploader button.

  10. #330
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    250
    Post Thanks / Like

    Default

    Hello,
    Does anyone have picture of emulsiontube on sst60 carb?

Page 33 of 33 FirstFirst ... 9101112131415161718192021222324252627282930313233

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Similar Threads

  1. "Hi Johnson" - Prop Master - Story
    By Tomtall in forum Propellers
    Replies: 6
    Last Post: 08-09-2015, 01:27 AM
  2. Replies: 24
    Last Post: 09-18-2014, 08:06 AM
  3. Dennis Johnson "Trafficade" Racing
    By Ron Hill in forum Boat Racing Encyclopedia
    Replies: 1
    Last Post: 11-05-2006, 06:26 PM
  4. "Team Johnson" Jacket
    By Tomtall in forum Parts and Accessories
    Replies: 0
    Last Post: 01-18-2005, 11:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •