Thread: Johnson "70mod"

  1. #351
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    263
    Post Thanks / Like

    Default

    Aargh, my bad! Didnt measure opening so have to estimate: About 5.5cm x 6.5cm on open end. Length is accurate, 20.5cm from powerhead gasket. Those holes on sides of tuner are 12mm each. Excan is full of 8mm holes on upper end.
    And offcourse little grinding downwards from P/h gasket with everything put together!

  2. #352
    Team Member
    Join Date
    Nov 2017
    Posts
    17
    Post Thanks / Like

    Default

    Quote Originally Posted by hupiveneilija View Post
    Next on todo list. These are 40mm diam so i must open carbs front a little.
    3D printed?

  3. #353
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    263
    Post Thanks / Like

    Default

    Machined

  4. #354
    Team Member
    Join Date
    Nov 2017
    Posts
    17
    Post Thanks / Like

    Default

    Very nice.

  5. #355
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    263
    Post Thanks / Like

    Default

    Little tinkerin today!
    Enlarged carbs to 40mm and grinded those grooves for mounting screws.
    Attached Images Attached Images    

  6. #356
    Team Member
    Join Date
    Mar 2017
    Location
    Central AR
    Posts
    4
    Post Thanks / Like

    Default

    What is size of the throat at rear on those carbs? I have 2 sets of 60hp carbs but they have 44 jets and would like to run them on an old 49ci motor but keep hearing that they are too small?

  7. #357
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    263
    Post Thanks / Like

    Default

    These are 1.5in

  8. #358
    Team Member hupiveneilija's Avatar
    Join Date
    Oct 2014
    Location
    Finland
    Posts
    263
    Post Thanks / Like

    Default

    Ready for swap😀!

    Edit: On their place
    Attached Images Attached Images     
    Likes hydrospeed77 liked this post

  9. #359
    Team Member
    Join Date
    Nov 2017
    Posts
    17
    Post Thanks / Like

    Default

    They look fast, but do they deliver.......
    Nice work as always.

  10. #360
    Team Member
    Join Date
    Nov 2017
    Posts
    24
    Post Thanks / Like

    Default

    Looking really nice.

    Did you machine those stacks? Or were they off-the-shelf item?


    Rob


    Sent from my SAMSUNG-SM-G900A using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 15 users browsing this thread. (0 members and 15 guests)

Similar Threads

  1. "Hi Johnson" - Prop Master - Story
    By Tomtall in forum Propellers
    Replies: 5
    Last Post: 06-13-2011, 05:36 AM
  2. Dennis Johnson "Trafficade" Racing
    By Ron Hill in forum Boat Racing Encyclopedia
    Replies: 1
    Last Post: 11-05-2006, 07:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •