Results 1 to 9 of 9

Thread: What OMC should have done....

  1. #1
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Thumbs up What OMC should have done....

    Hi Ron
    drag those comments over here..

  2. #2
    Administrator Ron Hill's Avatar
    Join Date
    Nov 2004
    Location
    Tustin, California
    Posts
    3,407
    Post Thanks / Like

    Default Where is the OMC Section?

    Quote Originally Posted by Powerabout View Post
    Hi Ron
    drag those comments over here..
    I could tell you "WHY OMC FAILED" in 10 or 20 articles. The main reason they failed, is the main reason that Hillary didn't get her *** elected....ARROGANCE, is the first word that comes to mind! PPP is another, piss, poor planning.

  3. #3
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Quote Originally Posted by Ron Hill View Post
    I could tell you "WHY OMC FAILED" in 10 or 20 articles. The main reason they failed, is the main reason that Hillary didn't get her *** elected....ARROGANCE, is the first word that comes to mind! PPP is another, piss, poor planning.
    wrong boss after Charlie Strang left

  4. #4
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    They should have kept building 2 strokes in HongKong and no doubt that would have moved to China.
    The EPA rules only only applied to the USA and then the EU. ( still do)
    The rest of the world was forgotten.
    Now that I live in Singapore and boat all around Asia its all carby 2 strokes less some of the big new engines on the large wooden tourist boats in Thailand but they are just buying what they can.
    For new engines its 2 strokes from Yamaha up to say 90 3cyl tiller rules asia, most of that range was copied from OMC.
    Lots of old Yam v4 and v6 from when they dumped them back in the 80's and 90's.

  5. #5
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    For the USA market they could have done in the front injected engines like MERC for a few years and nearly had a 10 year run before EPA forced DFI or the sold performance engines with EPA credits?
    Johnson 250 offshore with injection would have been a serious contender in the performance world.

  6. #6
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    Not to mention MERC and OMC should have been in the jet ski business...another business gifted to the Japanese
    Likes Ron Hill liked this post

  7. #7
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    You also see right through Asia and Australia/NZ the parts vendors ( from China, no EPA rules) that have permission from Yamaha to sell own branded engines that are Yam design but most with questionable quality parts meaning more market taken with old 2 strokes.
    Thanks Ron Hill thanked for this post
    Likes Ron Hill liked this post

  8. #8
    Team Member
    Join Date
    Sep 2008
    Location
    Singapore/Melbourne/Italy
    Posts
    780
    Post Thanks / Like

    Default

    I do see some of the sled manufacturers still selling injected 2 strokes that are not DFI so there was certainly some mileage in conventional injection and the EPA.

  9. #9
    Team Member
    Join Date
    Jun 2005
    Location
    Eastern PA
    Posts
    661
    Post Thanks / Like

    Default

    ..."MERC and OMC should have been in the jet ski business"

    Merc was, but they were so unstable they could "tip over in the garage" according to the skinny.

    Jeff
    "We live at the bottom of an ocean of air." - General Marvage Slatington

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •