SRX on my own . Taken out leading edge cup and trailing edge cup.
Sorry but your wording on the parts of the prop is not correct.
On the prop you show above there is added trailing edge cup and added tip cup. a fair amount of tip cup and looks pretty good.
there is no leading edge difference to normal srx.
the work done on your prop would add maybe 1 inch in pitch, and 1/4 inch less diameter . so now about 13.5 x 24..
you might be able to spin that to about 6500 with your new mods to your motor.
The LEADING EDGE is from the bottom of the hub going up to the tip.
as shown in pic below on my srx. the is prop was not altered from new apart from polishing.
yes sometimes the language barrier can be a problem, not only Finnish to English, but even English UK to English USA can also be very different.
but yes I can see you have put a nice cup in the tip, this will lift the bow much better. you have good skill with bending the prop nice.
I need to try this with my srx too.
if I can get the leading edge cupped and the tip cupped on srx it might just be the ideal prop for my boat.
I need more bite from start and a bow lift like a raker prop. but as you know in the uk and Europe no good price props are available, all too expensive.
and yes photo's do lie a lot on computer. I cannot get good picture os my 13x17, it looks realy bad in picture, but in real life it is very nice.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks