Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: Best wood for steaming and decks on kneeldown hydro.

  1. #1
    Team Member
    Join Date
    Dec 2004
    Posts
    3
    Post Thanks / Like

    Default Best wood for steaming and decks on kneeldown hydro.

    I need to replace some wood on my 50's kneel down hydro. It's a 1/2" thick by 1 3/4" tall and goes from the front center down the side about 76". Any suggestions on the best wood to put in the steam box? I read that straight grained ash was a good choice. The front of the hydro is ribbed with fabric but the decks on the sides need to be replaced as well. Any suggestions on what to use for the front and decks would be appreciated. Thanks Jim.

  2. #2
    Team Member zul8tr's Avatar
    Join Date
    Oct 2008
    Location
    Orlando, Fla
    Posts
    658
    Post Thanks / Like

    Default

    Pics please not following your explanation on the piece of wood you note. For the deck Ocume 3mm plywood is a great choice, not sure it that was used on that early hydro deck. As for fabric to stay original to the boat probably aircraft 80x84 weave Grade A cotton was used and nitrate dope applied to seal and tighten then flexible paint for color. There are other modern options for fabrics and sealers.

    See Fig 3-4

    https://www.faa.gov/regulations_poli...a/ama_Ch03.pdf
    “Extraordinary claims require extraordinary evidence” Carl Sagan

    Location: SW Orlando, Fl

  3. #3
    Team Member A/B Speedliner's Avatar
    Join Date
    Jun 2005
    Location
    New Smyrna Beach, FL
    Posts
    295
    Post Thanks / Like

    Default

    When replacing the fabric covering on a hydro we use Ceconite purchased from Aircraft Spruce and Supply. Follow directions that come with it and use their paint to finish off the process. We use oak or mahogany for ribs and stingers, keel, chine and gunnel.
    David
    Aeroliner Race Boats, LLC
    Old Race Boats Still Flip You Out

  4. #4
    Team Member
    Join Date
    Dec 2004
    Posts
    3
    Post Thanks / Like

    Default

    Thanks guys! I will go with the 3 mil okoume for the decks. Mahogany for the chine. Exotic hardwoods in Traverse City will hopefully have what I need. The boat is 9'4" long .When I bought it from a friend back in the 80's it had fabric on the front that was torn. I had a friend that did boat tops and vinyl so he put white vinyl on it for me. That has held up well. When I pull the staples I doubt I will be able to save it. I will look at my options when I get to that point. The boat came with a KH-7 on it but after going to the boat races in Beaverton Mi. and talking to the racers I bought a 102 and run that. Not in race trim of course on this boat. 0 to 45 pretty quick. Sold the KH-7 to friend and then bought it back years later. Still have it,awaiting paint work.The boat had a Canadian Racing Federation sticker on it and the name Bil-Rena on it. I don't know much more about it but they used to race kneel downs on Sanford Lake in Michigan back in the 60's. It may have been raced there. Pictures to follow once I get the lumber and start on it. Thanks again for your help. Jim.

  5. #5
    Team Member
    Join Date
    Nov 2011
    Posts
    65
    Post Thanks / Like

    Default

    I owned Australia's only timber bending company for 30 yrs, IMHO, white ash would be the way to go, soaks up the steam, and is easy to work with. Good luck.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. The last 100%, all wood Pugh Boat Works hydro?
    By epugh66 in forum Stock and Classic Outboard Division
    Replies: 4
    Last Post: 12-07-2013, 11:29 AM
  2. Rob Wood V8 F1 Velden
    By advantage marine in forum Outboard Racing History
    Replies: 7
    Last Post: 06-16-2011, 11:02 AM
  3. Safety First - Kneeldown or Laydown
    By randyrap in forum Stock and Classic Outboard Division
    Replies: 48
    Last Post: 08-31-2007, 05:50 PM
  4. Got Wood ?????
    By carl lewis in forum Boat Racing Encyclopedia
    Replies: 3
    Last Post: 05-31-2007, 09:17 AM
  5. shallow sponsoned kneeldown/laydown tunnel boat
    By Joe Silvestri 36-S in forum Boat Racing Encyclopedia
    Replies: 69
    Last Post: 01-24-2006, 05:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •