I have a 1975 stinger, my question is the carbs have a threaded hole on the main body of the carb for a jet, one carb has a #30 jet in it. Should all the carbs have that jet, the jet is located where the bowl mates with the upper body. Thanks
I have a 1975 stinger, my question is the carbs have a threaded hole on the main body of the carb for a jet, one carb has a #30 jet in it. Should all the carbs have that jet, the jet is located where the bowl mates with the upper body. Thanks
The 75 had 27s but not sure what was done to your motor over the years. After all, your motor is 43 years old. Are they the right cabs?
I double checked the serial number for the motor, it does show #33 jets for the idle restrictions, but only one carb has it, the other two doesn't have it, there's a hole for it though.
Picture would be helpfull for all of us.
Powerabout liked this post
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks