thinking about doing this in 2 stages

stage 1
champion plug
Taylor ignition (spark plug wires) 8mm
NGK plug boot
CCMS Reeds
velocity stack-trying to find somone to building me one currently i think there is someone alreayd on here building them for the 31.8 which is the same setup i know common mod for the 25hp is to use my carb so i assume if they are build for that it would work for mine .
SS prop


Stage 2- during next rebuild or refresh .
port and polish intake and exhaust
maybe shave the head for a little more compression and or thin head gasket ( copper sheet)
advance timing
over size piston when the time comes

not a race boat but a flat bottom scooter/ skiff out of texas for the bays . looking for punch and a little more get up ! nothing crazy

any ideas or suggestions let me know