Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: koing gear set

  1. #1
    Team Member
    Join Date
    Jul 2005
    Location
    Ont.Canada
    Posts
    16
    Post Thanks / Like

    Default koing gear set

    looking for gears to fit older 500cc splitcase..15/16 or14/15 lf they would fit.....case is 1970 straightcut press-on gears...thanx.DD

  2. #2
    Sam Cullis Mark75H's Avatar
    Join Date
    Nov 2004
    Location
    Annapolis, MD USA
    Posts
    1,795
    Post Thanks / Like

    Default

    I think new Konny gears and prop shaft will fit in your König case. Other than a change in the diameter of the shaft in the gear area and ID of the gear, I think current pieces are still an exact fit. If I recall the new shaft and gear are about .0025 larger than the old König shaft, so if you buy new gears and a Konny shaft you are all set. Steve will correct me if I got it wrong
    Since 1925, about 150 different racing outboards have been made.


  3. #3
    Team Member
    Join Date
    Jul 2005
    Location
    Ont.Canada
    Posts
    16
    Post Thanks / Like

    Smile if it was only that simple...

    this case is very old ...has V cutout in back of casting above propshaft area.
    date on case is 3/69..Brian Hendrick got me a n.o.s. driveshaft last winter from Steve.Brian also has one of these cases.So far l have seen 4 different large Koing spiltcases.mid..60's..same as mine but 2 bolts (hidden) near back of unit.late 60's /early 70's..(what l have) mid 70's..looks like Konny,but gears are still straightcut & pressed on but 14/15 instead of 15/16 like mine (still might fit)...late 70's early 80's same as Konny..larger o.d. on driveshaft at lower needle bearing &pinion gear & driveshaft are one peice. also gears are spiral cut....DD..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •